Cheap mens wedding rings uk

In this buying guide, we will review some of the best Cheap Mens Wedding Rings Uk options, cheap wedding rings uk specs, and the best cheap mens titanium wedding rings uk picks for you to buy.

A man’s wedding band is by far the most important piece of jewelry he will own in his lifetime. It not only represents the love and commitment the two of you share but the design he chooses also speaks volumes about his personality. Is he a classic prep? A medium-width platinum band is probably his best bet. How about artsy? Your fiancé might want to try a two-tone metal band, an engraved ring, or a design with a braided motif. And, of course, if your guy is more fashion conscious, let him sneak a diamond or two into his wedding jewel—after all, who says you get to rock all the bling in this relationship?

Cheap Mens Wedding Rings Uk


Man wears one of the best men’s wedding bands

Men have a seemingly unlimited number of choices when it comes to the wedding band metals. The variety of choices can make shopping for the best men’s wedding bands quite intimidating. This is especially true for men who weren’t expecting to have so many options to choose from.

The best way to begin your search is to learn about the metals that are used to create wedding bands so you can decide which one is right for your lifestyle.

The most popular metals for men’s wedding bands are gold, platinum, palladium, tungsten, titanium and silver. Each metal has its own strengths and weaknesses, so choosing the ideal metal type depends on your man’s personality and lifestyle.

Here’s what you need to know about each option before making this decision:

Mid-Weight Men’s Wedding Ring in Yellow Gold

Mid-Weight Men’s Wedding Ring in Yellow Gold

1. Gold

Many of the best men’s wedding bands are made out of yellow gold, rose gold, or white gold. In fact, gold is the reigning champion of men’s wedding band metals.

All gold is mixed with other metal alloys for additional strength since pure gold is extremely soft and unsuitable for daily wear. Gold bands are all measured in karats to denote their purity. For example, pure gold is 24-karats, whereas 18-karat gold is about 75% gold.

Most fine jewelry—including men’s wedding bands—should be purchased in 14 karat or 18 karat gold. Any piece of jewelry below 14 karat gold means that the purity is less than 50 percent gold.

Yellow gold is a classic choice that works well with both vintage and modern men’s wedding band settings. Although anyone can pull of a yellow gold wedding band, it really stands out on men with darker or olive skin tones.

White gold has a cool and contemporary look that complements fair and rosy skin tones well. White gold is often considered the most timeless of all colors of gold.

Rose gold gets its signature hue from copper, which is combined with pure gold to create this metal. Rose gold is often used to create vintage-inspired men’s wedding bands, however it is also frequently found in modern, mixed metal settings with white or yellow gold.

Because of its soft pink color, rose gold rings typically look warmer and more romantic. Don’t let its soft color fool you, though. Rose gold is actually the most durable type of gold since it contains copper, a sturdy and strong metal.

Gold in all purities and colors will scratch and bend, so rings crafted from gold will need to be polished or buffed on a regular basis as signs of wear and tear begin to appear.

Domed Step Edge Men’s Wedding Ring in Platinum

Domed Step Edge Men’s Wedding Ring in Platinum

2. Platinum

Platinum is one of the rarest metals in the world, so it’s no surprise that it’s also one of the most expensive metals on the list.

This white, mirror-like metal was at one time an extremely popular metal for jewelry. However, it was later rationed for war time. When platinum could no longer be used for jewelry, white gold was created as a less expensive equivalent. Since the late 90s, however, platinum once again emerged as one of the leading wedding band metals.

A “pure platinum” band has at least 95% platinum, and should be stamped to indicate its purity, typically in the form of a parts-per-thousand number. For example, a piece with 90% platinum and 10% alloys would be marked “900” or “900PLT,” to indicate 900 parts platinum out of a 1000.

Its high cost makes it a luxe choice, but its durability makes it a sensible choice. Platinum is one of the strongest precious metals in the world. Platinum rings will show minimal—if any—signs of wear and tear even if they are worn everyday. If your ring is going to take a lot of wear and tear, platinum is an ideal (and practical) investment.

Diamond Eternity Milgrain Men’s Wedding Ring in Palladium

This metal retains its color over time as well. Unlike other metals, there’s no need to replate platinum in order to restore its original beauty. The beauty of this metal will not fade, which means you can enjoy its shine and luster for years to come.

Diamond Eternity Milgrain Men’s Wedding Ring in Palladium

3. Palladium

A close relative to platinum, palladium also features a similar white hue and high shine. Although this metal isn’t quite as durable, it is less expensive. For men who want the look of platinum and a similar durability, palladium is a fantastic choice.

Rings crafted from palladium can feature diamonds, gemstones or engraved details. This metal is also extremely versatile and can take the wear of an active lifestyle. In fact, men often forget they’re wearing it since it is so lightweight and comfortable!

Koa Wood Inlay Men's Domed Wedding Ring In Tungsten

Palladium is also one of the few hypoallergenic metals available. If you are allergic to nickel, you won’t have to worry about skin irritation or discomfort with a palladium wedding band.

Koa Wood Inlay Men’s Domed Wedding Ring In Tungsten

4. Tungsten

Tungsten is a precious metal that is highly resistant to scratches, making it ideal for men who work with their hands. In addition, this metal never tarnishes, which is why it’s loved by so many low maintenance men.

Men’s tungsten wedding bands can be found in white, gray, and black, and are often designed with creative inlays like wood and colorful opal. Tungsten bands can also incorporate imprints, laser engravings and other personalized details. Because of this, tungsten rings often feature the most unique designs found on men’s wedding bands.

It’s important to note that tungsten rings cannot be resized. Therefore, make sure you know your man’s correct ring size prior to purchasing a tungsten ring.

Swirl Pattern Men's Wedding Ring In Black Titanium

Swirl Pattern Men’s Wedding Ring In Black Titanium

5. Titanium

In the past few decades, titanium has become incredibly popular for men’s wedding bands. Titanium is an incredibly durable metal that is as strong as steel but much lighter in weight. For this reason, titanium is perfect for men who live active lifestyles.

Titanium men’s wedding bands often feature unique inlays, etchings, and other beautiful details. The design options are endless when it comes to titanium rings, so you shouldn’t have any trouble finding one that’s perfect for you.

Titanium has a silver-white metallic color that looks sophisticated and chic. But, that’s not the only color of titanium available. Grooms seeking an alternative to white metal can set themselves apart with an edgy, black titanium ring.

Beveled Men’s Wedding Ring in Cobalt/Silver

Beveled Men’s Wedding Ring in Cobalt/Silver

6. Silver

Silver, or sterling silver, is one of the most well-known metals in the world. Many people are drawn to this option because of its affordability. Silver is the most inexpensive metal that is used to create the best men’s wedding bands.

Silver’s affordability makes this metal very attractive, however there are some drawbacks to this option. Silver is a high maintenance metal, which means it requires a lot of upkeep. This metal will start to tarnish over time, so it will need to be polished and cleaned on a regular basis. It also scratches fairly easily, so you may notice signs of wear and tear much sooner than you expected.

Although silver is not as durable or low maintenance as other metals, it is a good option for those who are working with a tight budget. Plus, silver is similar to white gold in appearance. Purchasing a silver ring is a great way to pull off a high end look with a much smaller budget.

While there are numerous metal choices for men’s wedding bands, the ideal metal should suit his personality and lifestyle. All metals have strengths and weaknesses, but they can all create the ideal ring. The metal that you select for his perfect ring should fit his hand, his life—and, most importantly, your budget.

Men’s Wedding Bands: Brief History

Back in the last century, men’s wedding bands (unless you were of royal heritage) were typically made of 14K or 18K gold (or platinum) with a 3 to 6 mm rounded edge. That’s what guys got. But now, if you have even a glimmer of fashion sense, you know that there are myriad rings styles, designs, metals, and textures to choose from.

On Blue Nile’s website, for example, you can select various metals and styles.


Courtesy of Blue Nile
A look at the many metals and styles courtesy of Blue Nile.

Before we get into the styles, let’s go over some of the basics. If you are shopping at a brick-and-mortar retailer, the sales staff can be extremely helpful, but if you are buying online and you don’t want to ask too many questions, we’re here to help. I culled a list from my male friends; below are some of the questions they most wanted answered. And yes, a band is the same thing as a ring.

How Do I Measure My Ring Size? 

This is not a do-it-yourself sort of thing. It’s best to have a jeweler do it with his or her ring sizer that displays bands in sizes that go from 2 to 12. Remember that you don’t have to buy your ring on day one; you can stop in to browse different styles and try them on. You could also buy a ring-sizing kit for $12.99 from Amazon (see photo below). But the jeweler knows best.

Ring sizing and finger measurement materials courtesy of

If the ring is really wide — 6mm or more (or a heavier ring), you should go ½, ¾ or one whole size up. For example, if you wear a size 9 in a thinner band, you might want to try a size 10 to see if it is more comfortable in a wider style. 

You know the ring fits when you can put it over your finger and no matter how much you wiggle your finger or try and fling the ring off your hand, it won’t move over your knuckle. Not very scientific, I know, but it works. As long as it doesn’t go over your knuckle, you can wear the ring a tad looser if you’re not used to wearing jewelry. This way you won’t be playing with it or moving it up and down when you’re supposed to be answering emails. 

You can also go lighter weight with the ring you choose. Some men’s wedding bands are super heavy, rendering them uncomfortable and almost claustrophobic to wear. Also, consider the metal (which we’ll discuss later). For example, the same ring cast in platinum will be much heavier than those cast in 14K or 18K gold.

6mm Brushed inlay 14K yellow gold men’s wedding band courtesy of Blue Nile.
6mm Brushed inlay platinum men’s wedding band courtesy of Blue Nile.

The other aspect to remember when it comes to size is that your fingers shrink in winter and swell in summer (the humid months), so if you go to a jeweler to size you, they will consider the season.

Wedding Band Shapes

While classic wedding bands are round — representing a continuous circle around the finger that cannot be broken for consistent and everlasting love — there are different edges and shapes of the bands that you might feel more comfortable wearing.

  • Domed: The most classic of all with its rounded edges
  • Flat: Contemporary and minimal in feeling, this shape rests flat against the finger
  • Beveled: This style has edges that are cut on an angle so that the ring gives a slightly rounded appearance. It is similar to domed but is lower profile and more modern in style
  • Knife-Edged: This band has two edges that slope and meet to form a point in the middle, giving the ring a more angular appearance
  • Coin: Actually looks like the sides of a coin, with small cuts on the border of the outside of the band
  • Step: This is formed by multiple ridges to add dimension to the outer rim of a plain flat band


4mm Men’s high-domed wedding ring in yellow gold. Photo courtesy of Novell Design Studio.


9mm European comfort-fit white gold ring with a classic satin finish. Photo courtesy of Benchmark Rings.


Beveled Ring for Men
6mm 18K white gold beveled comfort fit wedding band. Photo courtesy of James Allen.


Knife Edge Ring for Men
2.5mm 18K yellow gold knife edge wedding ring. Photo courtesy of James Allen.


5mm Furrer-Jacot palladium and yellow gold diamond wedding band with coin edge. Photo courtesy of Borsheims.


Step Ring for Men
6mm Mixed finish step edge milgrain men’s wedding ring in cobalt. Photo courtesy of

Wedding Band Metals

Men’s wedding bands offer a wide range of materials. At times it could feel intimidating. We advise you to think about the choice of metals that best suits your lifestyle, career, and comfort level; any allergies you might have; your budget; the maintenance of the ring; and what looks best on your complexion. Let’s start with the classic and timeless: gold.

Gold Wedding Bands

Around for millennia, gold is an enduring metal and has long been the most popular choice for men’s wedding bands. Gold is available in four different colors: yellow, green, white, and rose gold. These are all mixed with different alloys for both color and strength — pure gold is extremely soft, and therefore, the higher the karat, the softer the gold will be. For example, 24K is pure gold but is prone to bending out of shape easily. 

We recommend sticking with 18K and 14K golds for wedding bands. Both of these karats come in all the colorways mentioned above. 18K is still a bit softer than 14K but is richer in the yellow and green gold (green gold has a higher karat look but is close to yellow), and is still a suitable strength for wedding bands. It is also more expensive due to the higher purity of the metal. 

When choosing the color gold — it’s advisable to go with the one that suits your complexion the best (our advice: try it on and see what you like). There are certain textures and techniques that combine colors into one ring, which is another thing to consider.

As far as white gold is concerned — there is always a slight yellow tint to it when it is cast — the process to achieve a pure white look is to rhodium plate it. This process creates a beautiful white finish, but beware, it’s one of the more high-maintenance golds since you will have to have this re-plated and polished at least once a year if you wear your ring every day.

Gold should be polished as often as possible as it does scratch easily, but if you don’t mind personality, character and wear, you can have it polished less often. Avoid too much wear and tear. If you notice this, bring it in for polishing, as you’ll want to keep it in good condition. All gold rings can be set with diamonds or gemstones if you want a bit of sparkle. Bling adds details and textural interest.

White Gold

4mm Comfort fit wedding band in white gold. Photo courtesy of Borsheims.

White and Rose Gold

6mm Brushed inlay 14K white and rose gold wedding ring. Photo courtesy of Blue Nile.

Yellow Gold

5.5mm Christian Bauer beveled edge wedding band in yellow gold. Photo courtesy of Marisa Perry.

Now let’s look at the variety in white and other metal choices.

Platinum Wedding Bands

Platinum was officially discovered in the late-1700s and is the purest of metals. During WWII it was rationed for the war but became popular again and took off in the 1990s as the most desirable metal for both men’s and women’s wedding bands. Its natural steely white color, reputation as the strongest precious metal, and ability to be worn every day with minimal signs of wear, make it the perfect ring for wedding bands and well worth the investment.

Platinum’s patina actually grows more beautiful with age. It retains its luster, is tarnish-free, and can be resized. If you want a brighter luster, you will polish your platinum ring once a year. However, if you prefer the natural luster, which becomes less shiny with age, then you can just clean your ring with a gentle dish soap and allow the natural character to show with age. Like gold, it can also be set with diamonds or gemstones and is a wonderful candidate for engraved and other textural details.

6mm Beveled edge matte wedding ring in platinum. Photo courtesy of Blue Nile.

Palladium Wedding Bands

Palladium is also a natural white metal. Similar to the look and durability of platinum, ithas become the most expensive of all of the metals — something platinum used to be. In addition to the vast difference in price, platinum can feel heavy in different styles,  whereas palladium is lightweight and many men say it feels extremely comfortable.

It can be set with gemstones and also designed with textural interest. It does, however, show scratches, therefore it needs more polishing than platinum and it is more difficult to resize. One of the favorite attributes of palladium is that it is one of the fine hypoallergenic metals. Unlike white gold, it is not alloyed and does not need plating, which often contains nickel that can irritate the skin. 

6mm Sampson flat palladium wedding band with horizontal grooves and offset dual offset milgrains by Artcarved Rings. Photo courtesy of Larson Jewelers.

Sterling Silver Wedding Bands

Sterling silver is a favorite among men who prefer either an extremely toned down look or a rock-and-roll look at an affordable price. It’s one of the least expensive metals in wedding rings and like gold, it has been around for centuries. Textural interest is a big draw when it comes to sterling silver as the softness of the metal allows for all different types of design details. But this is also one of its drawbacks — it’s high maintenance, scratches easily, and could bend out of shape if it’s really light weight. It will also tarnish quicker than other metals so you will need to have it polished, cleaned, and checked regularly.

8.5mm Deco band ring in sterling silver. Photo courtesy of David Yurman.

Stainless Steel Wedding Bands

Although used in watchbands for ages, stainless steel is a metal that is relatively new to wedding jewelry. It’s durable, accessibly priced, and makes for a steely white metal. However, it doesn’t wear as well as some of the other metals and therefore might need to be polished more often. 

8mm stainless steel chain mesh ring. Photo courtesy of Just Men’s Rings.

Cobalt Wedding Bands

This metal is also increasing in popularity in the category of men’s wedding bands. It’s a white metal, stronger than gold, and priced for guys on a budget. It scratches less than stainless steel so it might be a better option when choosing a more accessibly priced ring. Like stainless steel, it can’t be resized. 

7mm Satin finish wedding ring in blackened cobalt. Photo courtesy of Blue Nile.

Titanium Wedding Bands

Titanium is strong while also being lightweight and comfortable, and is one of the metals that doesn’t tarnish. It’s as durable as steel yet much more wearable, lightweight, and comfortable. Polishing will erase any signs of wear. Wedding band designers like titanium because it can showcase different techniques and textures. It’s affordable and has an almost silver metallic sheen. Plus, it is available in black for grooms looking for an edgier or personalized look. The downside? It’s difficult, if not impossible, to size.

8mm 14K white gold and grey tantalum wired crosshatch pattern center band. Photo courtesy of James Allen.

Tungsten Wedding Bands

Low maintenance and offered in an array of masculine colors such as grey and black, tungsten is a precious metal that never tarnishes and is resistant to scratches. Like titanium, tungsten is the perfect backdrop for different design details and creative techniques such as laser engravings and etchings to name just a few. It is also often inlaid with stones. But tungsten is a brittle metal that can chip or break and therefore cannot be resized. Note that many rings that are not made from ‘fine metals’ and are extremely strong cannot be resized. The two strongest metals for men’s wedding bands are platinum and tungsten.

6mm Comfort fit gray wedding band in tungsten. Photo courtesy of Blue Nile.
6mm Brushed and polished comfort fit wedding ring in classic gray tungsten carbide. Photo courtesy of Blue Nile.

Wedding Band Details/Textures

Remember that famous line from “When Harry Met Sally” when Billy Crystal as Harry says to Meg Ryan’s Sally, (paraphrased): “There are two kinds of women: high maintenance and low maintenance… You’re the worst kind. You’re high maintenance but you think you’re low maintenance.” It’s a chick flick, I know — but the same can be said about rings. Remember this when selecting from your ring’s details and textures.

Mokume Gane 

This is an ancient Japanese technique for mixing colors of metals that creates a wood grain pattern in the rings. Each is different and unique.

Half round rings range from 3.6mm to 10mm, while flat rings range from 3.6mm to 8mm. Photo courtesy of George Sawyer.


The style dates back centuries and is primarily used in yellow gold. Small granules or bead-like structures are either fused or soldered to the surface of a ring, evoking an ancient and highly tactile feeling.

4mm Denise Betesh, men’s classic beaded band in 22K gold. Photo courtesy of The Clay Pot.


On the edge of a band, a jeweler makes tiny cuts into the metal that look like intricate tiny beads, giving a wedding band a vintage feel.

6mm Monique Lhuillier knife edge milgrain wedding ring in platinum. Photo courtesy of Blue Nile.
5mm Standard comfort fit 10K gold milgrain wedding band. Photo courtesy of

Rope Twist, Braided, and Basketweave 

These are all woven textures that can signify continuity and refer to the infinity knot that is unbroken — when in a band that encircles the finger, it speaks to enduring love. These all can feature one, two, or three different colors of metal. Some are flat to the finger while others are raised and recessed.

5.75mm wide Cinque Plait wedding band in 18K yellow gold. Photo courtesy of Baltera.

Recessed Line/Stripe

Simple and very popular, this style features a line circling the center of the ring, like the one below.

Stripe Center Men's Band
5.5mm Christian Bauer men’s wedding ring in palladium with a satin finish and a high polish stripe in the center. Photo courtesy of JB Hudson.

Linear or Scattered Patterns

You may see diamonds and other gemstones in linear or scattered patterns; this platinum satin ring has a row of stones.

Titanium Men's Ring
Titanium, angle satin wedding band with coco diamonds. Photo courtesy of Lashbrook.

Wedding Band Finishes

Think of finishes as the final phase in designing the ring; do you want a bright gleaming ring or one that is more subdued? Here are the options to choose from…


Think: shiny and reflective with a mirror-like quality, and smooth to the touch. This is the most noticeable finish but to keep its sheen, it needs to be polished often.

5mm Christian Bauer high polish golfers band 18K yellow gold wedding band. Photo courtesy of Marisa Perry.


Smooth to the touch, less shiny, and it tends to diffuse rather than reflect the light, yet still has a subdued sheen.

5.5mm Furrer-Jacot white gold satin flat wedding band. Photo courtesy of Borsheims.


This diffuses the light and is similar to a satin finish — but a matte finish is so subtle it looks like it has almost a worn patina.

7mm Matte classic wedding ring in 14K yellow gold. Photo courtesy of Blue Nile.


Similar to satin and matte in its subtle diffusing of the light, this finish has a soft texture rather than being completely smooth.

Brushed Ring for Men
6mm Brushed and polished comfort fit wedding ring in black tungsten carbide. Photo courtesy of Blue Nile.


More rough-hewn than brushed finishes, this kind of ring is actually blasted with fine grains of sand. It is the most difficult to care for when the finish starts to wear. You should bring it to the jeweler and have them redo the finish at the first sign of wear.

6mm 14K yellow gold band with sandblast center and beveled edge. Photo courtesy of Gabriel & Co.


It’s exactly what it sounds like and could be considered a texture as well as a finish. A jeweler uses different types of hammers to create a crinkled, dimpled effect in the metal. This is often done by hand or can be hammered into the model and then cast, offering a shiny/matte textural interest.

Matte hammered flat comfort fit wedding ring in platinum. Photo courtesy of Blue Nile.

How to Maintain/Restore Matte, Satin and Brushed Textures

These types of rings will start to lose their finish and look like you bought a polished ring over time and with the wear of repeated washing of your hands. To quickly bring back the more subtle finishes, take a medium bristle toothbrush or ultra-fine steel wool and very gently go over the surface of the ring. If you see it starting to dull and go back to the original finish, you can keep working at it. To get the ultimate finish back, you will need to bring it into your jeweler.

Once you’ve decided on the metal, width, shape, texture, and finish, you can then decide on whether or not you want to customize the ring with a word, initials, dates, or a saying by hand or laser engraving on the inside of the band.

Hand engraving is a dying art in which a jeweler uses tools to engrave each letter in different styles of fonts that you choose. It offers the character of an old-world technique.

Laser engraving is less expensive and more precise in its execution and technology. Hand engraving can only be done on certain metals like platinum, gold and sterling silver, while laser engraving can be applied to a more diverse range of metals. 

Below we’ve compiled lists of different brands, manufacturers, and websites of engagement rings that range from high-ticket to high-value (AKA great for the budget-minded).

Ring Brands and Stores to Know

High-End Designers

Affordably Priced Manufacturers

Large Online Wedding Ring and Bridal Sites/Stores

Leave a Comment