Finding the best Dewalt brushless combo and dewalt combo kit can be hard if you’re unaware of what features to look for especially that there are so many of them to find around. For this reason, we’ve put up a guide highlighting the top dewalt brushless combo review in the category.
Our team has researched and reviewed these products to help you come up with a better decision.
Dewalt brushless combo
DeWalt 12V Brushless Drill and Impact Driver Combo Moves 12V Line into Competition
Every 12V shootout we’ve done in the past couple of years left me feeling kinda “meh” about DeWalt. Their 12V cordless tools didn’t have anything wrong with them per se, but they were being outpaced by an increasing number of brushless models. Whispers reached us a few months ago and now I finally have the DeWalt 12V brushless drill and impact driver combo in my hand.
- Much more compact than previous brushed models
- Modest weight savings over previous models
- Considerable performance gains
- Excellent value at $149 for the 2-tool combo kit
- No major drawbacks
DeWalt has done a fantastic job bringing down the size and ramping up the power in these tools. The DeWalt 12V brushless drill and impact driver combo kit takes a couple of tools that felt like afterthoughts and turns them into legitimate contenders. If you’re a DeWalt fan, it’s time to be proud of their 12V line again!SUPPORT OUR ADVERTISERS
DeWalt 12V Brushless Drill and Impact Driver Combo Kit
DeWalt 12V Brushless Drill vs 12V Brushed
Let’s start by taking a quick tour of the improvements DeWalt made for their new brushless drill and compare it to their brushed model.
- Length: The brushless drill drops more than 1.5″ off of the brushed length, now just 5.97″ long
- Weight: The smaller size also comes with a 5-ounce weight reduction
- No-Load Speed: The brushless DeWalt DCD701 picks up 25 more RPM in low (425 RPM) and maintains the brushed model’s 1500 RPM top speed
- Power: There’s a big jump in power, moving from 189 UWO to 250 UWO—a 32% increase
- Kitted battery moves from 1.3Ah to 2.0Ah
There are some things that aren’t changing as well. Both models have…
- 15 clutch settings
- 3/8″ chuck
- 2-speed gearbox
Looking More Broadly
The length of the DeWalt 12V brushless drill is a massive improvement. Looking back our 12V drill shootout, it’s shorter than any other drill we tested, meaning it can get you into tighter spaces than any of its major competitors.
At 2.4 pounds with its battery, the DeWalt DCD701 is in the lighter half, just a few ounces heavier than the top contenders and nearly a pound lighter than Milwaukee’s M12 Fuel 2503.
Overall, this is a drill that’s about the best combination of weight and size we’re seeing in the 12V landscape. Add in handle curves that fit your hand well and you can’t ask for much better when you’re looking for a compact drill.
What About Performance?
I put the DeWalt 12V brushless drill through a variety of drilling tests and it passes with flying colors. With as well as it performed, I decided to run a little head-to-head test against Milwaukee’s M12 Fuel 2503.
Starting with the smallest Bosch Daredevil spade bit in my 12-piece set, I drilled through untreated 2x pine until the drill couldn’t go any further. On high, both drills were able to run a 5/8″ bit through. While they were both successful, DeWalt was clearly faster.
Kicking both drills into low, Milwaukee moved right on past the 1″ bit and successfully drilled through with a 1-1/4″. That’s impressive work for a 12V drill. DeWalt one-upped it, though, driving through with a 1-3/8″ bit.
DeWalt 12V Brushless Impact Driver
Like the drill, let’s start with a look from the brushed generation to the brushless impact driver.
- Length: The brushless model drops 1.2″ off the head length, shrinking to 5.05″
- Weight: The weight comes down slightly, losing 2.6 ounces
- No-Load Speed: The top speed jumps from 2450 RPM to 2850 RPM and gains an extra 200 IPM
- Speeds: The brushed single speed motor gives way to 3-speed electronic modes on the brushless—high, low, and Precision Drive assist
- Power: Maximum torque get a massive upgrade, skyrocketing from 950 in-lbs to 1450 in-lbs
- Kitted battery moves from 1.3Ah to 2.0Ah
The features DeWalt doesn’t change are really good ones and we’re glad they kept them.
- 3-LED light ring around the chuck
- One-hand bit insertion
- One-hand bit ejection
- Accepts 1″ bits
Looking More Broadly
Like the drill, the DeWalt 12V brushless impact drive makes huge gains in the footprint department. Its 5.05″ head length is the shortest of any traditional pistol grip models in this class and goes toe-to-toe with Ridgid’s Palm Driver (5.0″).
The couple of ounces that the DeWalt DCF801 drops helps its overall ranking in the 12V class as well. At 2.24 pounds, it sits right next to Bosch’s PS42 and Milwaukee’s M12 Fuel as the lightest pistol grips with a battery.
Once again, DeWalt is taking steps that make it the best combination of size and weight in the 12V class. We’re definitely impressed. At the same time, DeWalt is calling these “Xtreme Compact” cordless tools and it looks like the marketing matches the claim.
Realizing the DeWalt 12V brushless impact driver is primarily a screwdriver and small nut driver, I put it to the kind of light work I expect from my 12V impacts. For a 12V impact, it’s a quick-driving model that’s very easy to use.
For a better idea of its performance, I brought out Milwaukee’s latest M12 Fuel impact driver—the very same one that dominated our 12V impact driver shootout. This time, I used 1/4″ ledger screws into layered OSB subfloor to see how their driving speed compared. Test after test, these two impact drivers simply refused to give in. They’d be at a dead tie. Milwaukee would be slightly ahead. DeWalt would be slightly ahead. By the time it was done, I couldn’t make a call as to which one was faster.
We put DeWalt up against the best 12V impact drivers available. You can check out its head-to-head performance yourself here. If you just want it in a nutshell, this is how it fared:
- Size: 90
- Feature Set: 100
- Speed: 68
- Torque: 66
- Noise Level: 86
- Value: 85
- Overall: 4.0 out of 5.0 (3rd place overall)
SUPPORT OUR ADVERTISERS
We’re looking at the DeWalt 12V brushless drill and impact driver combo kit. The set comes with a charger and a pair of 2.0Ah batteries for $149. If you want just one or the other, the kits are $99 as are the bare tools. Another $15 on the individual tool kits gets you a TSTAK container to carry them in, but there isn’t an option for the 2-tool combo.
Let’s put that combo price in perspective a little. Milwaukee’s current M12 Fuel combo (2598-22) runs $229. Makita’s CT232 runs $139 to $149, depending on what case you want. Bosch doesn’t offer a combo kit for their 12V brushless drill and impact driver.
The big takeaway is that you’re paying a little more than Makita for serious performance gains. That performance closes in on Milwaukee for a much lower price.
Who Should Buy the DeWalt 12V Brushless Drill and Impact Driver Combo?
I am very impressed with DeWalt’s performance, ergonomics, and feature set for this combo. The performance is close enough to the top that I have to wait until we’ve put it through all of our standardized tests before I make a call. It’s so good that one or both of these might take over the top overall rankings.
Backing that up with incredibly compact designs, it hits what you need if size and weight are your highest priorities. And with the price set where it is, the DeWalt Xtreme Compact combo kit may very well be a perfect balance that fits everyone’s needs.
There’s zero doubt in my mind that this is a Pro-level 12V kit and its price is certainly attractive for serious DIYers, too. What’s interesting is that there’s high enough performance here to make homeowners think about passing on a DIY/Prosumer 18V line and going for more compact 12V tools instead.
The Bottom Line
DeWalt has done a fantastic job bringing down the size and ramping up the power in these tools. The DeWalt 12V brushless drill and impact driver combo kit takes a couple of tools that felt like afterthoughts and turns them into legitimate contenders. If you’re a DeWalt fan, it’s time to be proud of their 12V line again!
DeWalt 12V Brushless Drill and Impact Driver Combo Specifications
- Kit Model: DeWalt DCK221F2
- Included Batteries: 2 x 2.0Ah
- Price: $149
DeWalt 12V Brushless Drill Specifications
- Model: DeWalt DCC701
- Power Source: DeWalt 12V Max batteries
- No-Load Speeds: 0–425/0–1500 RPM
- Max Power: 250 UWO
- Length: 5.97″
- Weight with Battery: 2.4 lbs
- Price: $99
- Warranty: 3 years
DeWalt 12V Brushless Impact Driver Specifications
- Model: DeWalt DCF801
- Power Source: DeWalt 12V Max batteries
- No-Load Speed: 0–2850 RPM
- Max Torque: 1450 in-lbs
- Impact Rate: 3600 IPM
- Length: 5.05″
- Weight with Battery: 2.24 lbs
- Price: $99
- Warranty: 3 years
Best Tool Boxes Reviews
First on our list is one of the top-rated and best-reviewed toolboxes. Dewalt is a renowned company in the industry and the Dewalt Tool Box DWST08204 Extra Large Tough System is from a series of carrying cases from the house of Dewalt. The company has a wide range of carrying and storage products from storage to portability.
- Highly robust built foam-based box with a very large interior storage space and superior durability
- The vertical internal storage is great for placing hand tools
- It has a removable tray for hand tools and other misc objects
- Comes with side latches that let you stack one module over the other thus giving you clear shelf function and also segregation possibility as well.
- The side handles are smooth and make the carrying it around very easy and let you place a lot of such boxes on the Metal carrier easily
- Made out of IP65 Integrated water seal outside and inside which will give you greater protection against any moisture or weather ailments.
- Anti-rust metal latches that are weather friendly
- Can store up weights till the capacity of 110 lbs easily
- Has a central locking mechanism which is built to facilitate its stacking on the ToughSystem stacking family
- Foldable brackets which enable tailored configurations for the metal carriers
- The foam box wall is about 4 mm in thickness thus gives it a robust quality even if used as a single unit.
- The vertical compartments are easily interchangeable for the box to be used as one large unit or shelved too.
- The box is also available in different models and the ToughSystem family is a large suite of storage and movement utilities
- Though it is portable with the latches and handles, the 110 lbs might not exactly be portable enough for a regular day job toolbox
A toolbox that is straight out from the 80’s model, the JEGS 81400 Black is a 3 drawer professional toolbox. You can have this for your truck, for garage work, for your home usage, car repair, trucks or trailers. A highly reviewed and received product, it is a decent box to store away your utilities easily and for a long time.
- Has 3 drawers of convenience for storing spanners, screwdrivers, wrenches and other flat long tools
- The box is entirely made out of high quality 16 gauge steel
- The drawers can be extended out fully, removed and replaced
- Glide system of the drawers is ball-bearing based thus it promises smoother movement from a point to another
- Can be locked and carried too. Includes 2 keys as well in the package.
- The latches are strong, hold firmly and are rust-resistant in nature
- Has a black powder coat finish
- Dimensions of the box are about 20.5 inches in length, 12 inches in height and 9 inches in breadth
- Very portable thanks to the meagre 17 lbs weight
- The handles come with JEGS comfort grip handles which are great for lifting and carrying without causing hand bristles
- Though touted as non-rustic, the outer layer might end up losing the paint if not taken care of and end up causing some rust.
Much like the heavy foam built grade of the Dewalt, the Plano 823-003 contractor-grade PO series is a 22 inches large Tool Box with black handles and latches. The grey graphite box comes with all there is much like the Jegs box mentioned above but with a robust build, looks and large capacity.
- Highly reviewed and rated box to store and arrange a wide range of tools
- Moulded plastic heavy foam built box
- Sized at 22 inches length, by 13.5 inches height and a 12.5 inches breadth.
- Plano modelling moulded with high-quality foam and durable build quality
- Includes two lift-out trays. These trays facilitate deep storage compartments which can let you either store a lot of small tools, a couple of large tools or adjust both large and small tools.
- The fold-down handle will let you take the toolbox with you wherever you go with great ease.
- Includes two stove away organizers that will stay in their place securely without any movement or disorganizing.
- The handles and the latches are reinforced for better durability and strength.
- Extra deep construction and the easy access to that is an add on feature
- Comes with a 1-year manufacturer’s warranty from the date of purchase which is a fresh and promising addition to such storage products.
- None too specific to mention
Yet another 22 inches large tool storage box, the Stalwart 75-MJ5051B is a contractor-grade toolbox that comes with a really cool and comfortable and heavy-duty handle that makes the box a highly portable make and build.
- The heavy-duty build quality of the Stalwart box makes it a great professional-grade toolbox and not just another “for the attic” toolbox
- It comes with a highly unique cantilevered tray that increases your ability and the reach you need to access the tools stored and also you can easily see through what you need and when.
- Has a clear-top lid that makes it easier to access the top shelf without needing to open the whole box.
- The shelves on the top have about 15 removable divisions and 3 parts that are permanently dividable. This increases the stability and avoids any tipping of the box as a whole.
- The box has a whole dimension of 22 inches length, 10 inches height, 12 inches width exterior. For the interior, it has a total usable 18.75 inches length, 2.25 inches height (compartmentally), and about 9 inches in width
- Comes with support legs that remove the chance of tipping over
- The handle is very comfortable to hold near the grip area and the entirety is made out of stainless steel
- The overall build material is Polypropylene and Stainless Steel
- Highly portable and has a great value for money
- None too specific to mention about
Next up we have the Akro Mils ProBox, a 14 inches large plastic built toolbox. This red coloured box gives you the vintage feel on as to a professional 70’s toolman. Also, Akro Mills comes with a fantastic 60 years history into building affordable storage equipment.
- Comes with very large storage space and a total of 14 inches in length
- Has a quite large removable tray for you to store smaller equipment or tools
- The box has a very strong steel latch to it. The padlock’s eye is large enough to shut the box close for the better
- Loaded boxes can be carried around with great ease and comfort as the handle has a very comfortable and highly secure grip to it
- The outer layer of the box is chemical resistant and as the product is made in the USA, you can rest assured of the quality
- Affordable pricing and very good storage capacity
- Could have had a bit more compartments or shelves for the price
Yet another red coloured toolbox chest, the Craftsman is a metal chest that comes with 3 drawers. Very sturdy in build, the chest comes with great reviews and ratings to it.
- Plenty of storage space but has a compact structure to it.
- The hinges are tight and sturdy in it that can withstand any rough handling
- The lid might seem a bit chintzy after a while but it does the job
- The drawers are piano styled and can be pilled out with great ease
- All while they have a great locking mechanism to them as well.
- The box’s handle has a rough handle which makes it easier to hang it by just about anything.
- The paint job on the metal surface could have been a bit better.
Finally on our list is the Keter Pro Classic toolbox. This toolbox has a robust plastic built body with compact shut case shelves out of durable and rugged quality in total.
- Decent 18.99 inches Length whereas 10.24 inches in width and 9.84 inches in height.
- Made out of high-quality rugged polypropylene resins which promises greater shelf life
- The interior utility tray is removable and retractable
- The lid is made out of metal and the stopper can hold the lid still intact while you are working.
- The padlock has separate storage space for quick access of tools
- The lid organizers are present on both sides of the handlebar where you can store small tools or spare parts etc.,
- None too specific to mention
The next one in our list is from Stanley, a 19-inches large plastic built toolbox. It comes with black handles and a latch that makes it easy to carry and store your utilities easily.
- Designed with a robust structure with large interior storage space and superior durability.
- With its extra-wide soft-grip handle, you can easily lift and carry it around to your workplace.
- It has a removable tray that provides enough space for larger tools to be stored underneath.
- Sized at 19-inches length, by 9 inches height and 10.25 inches width.
- Organizers on top lid for small parts storage and convenience to use.
- It is a one-hand operation latch that allows opening while other hand is occupied and also shuts automatically.
- Affordable pricing and good storage capacity.
- It has a black powder coat finish and offers a limited lifetime warranty on any manufacturing defects.
- It is durable, versatile, and secure that gives the mobile craftsman the versatility they need for the workplace.
- Made out of high-quality plastic that ensures greater shelf life.
- It would have a bit more space/shelves for proper storage.
- Could improve the design of the latch locking system.