diy electric helicopter

Suppose you want to know  the Diy Electric Helicopter tips, then this article is what you need. It contains how to make a rc helicopter step by step. Also, it includes how to make helicopter that can fly at home.

Flying RC helicopter is really very exhilarating. Their versatility gives a RC pilot a complete access to the three-dimensional space in such a way that no other machines can! I have played RC helicopter for more than one year but still find that I have just learnt a few tricks that it can perform.

There are generally two micro-helicopters ( indoor ) in the RC market. I have already planned to buy one of them as they can fly inside the living room and even take off on ours hand. Unlike those operated by gas, these electric helicopters are very clean and give out no terrible noise at all. In one nightfall, I visited a web site, which is about how to make a hand made RC helicopter. I was totally impressed and started designing my own helicopter. Here is my helicopter:

how to make a rc helicopter step by step

Diy Electric Helicopter

To make this electrical helicopter you need to prepare.

-1 Plastic bottle.

-2 DC motor (5V).

-Glue, Glue gun.

-Scissors.

-Drill machine.

-Switched Battery Box.

-Sterile sticks.

-Four straw to drink.

-Four electric fire.

-1 Buton auto on-off.

Good Luck!Add TipAsk QuestionCommentDownload

Step 1: Make the Cockpit (Front Part)

Make the Cockpit (Front Part)
Make the Cockpit (Front Part)

2 More ImagesAdd TipAsk QuestionCommentDownload

Step 2: Make and Install the Helicopter Rotor

Make and Install the Helicopter Rotor
Make and Install the Helicopter Rotor
Make and Install the Helicopter Rotor

3 More ImagesAdd TipAsk QuestionCommentDownload

Step 3: Make the Cockpit (Rear Part)

Make the Cockpit (Rear Part)
Make the Cockpit (Rear Part)

3 More ImagesAdd TipAsk QuestionCommentDownload

Step 4: Make the Helicopter Tail

Make the Helicopter Tail
Make the Helicopter Tail

3 More ImagesAdd TipAsk QuestionCommentDownload

Step 5: Make and Install the Tail Rotor

Make and Install the Tail Rotor
Make and Install the Tail Rotor

8 More ImagesAdd TipAsk QuestionCommentDownload

Step 6: Make the Helicopter Main Rotor

Make the Helicopter Main Rotor
Make the Helicopter Main Rotor

6 More ImagesAdd TipAsk QuestionCommentDownload

Step 7: Electronic Part

Electronic Part
Electronic Part
Electronic Part
Electronic Part

Add TipAsk QuestionCommentDownload

Step 8: Add Power Source

Add Power Source
Add Power Source
Add Power Source

6 More ImagesAdd TipAsk QuestionCommentDownload

Step 9: Make Landing Skids

Make Landing Skids
Make Landing Skids
Make Landing Skids

3 More ImagesAdd TipAsk QuestionCommentDownload

Step 10: The Helicopter Is Complete

The Helicopter Is Complete
The Helicopter Is Complete

how to make helicopter that can fly at home

How To Make Helicopter Propeller

How It Works:
1. Energy is stored in the sport rubber by winding the propeller.
2. When flown, the rubber band rapidly releases its energy by unwinding, which turns both the propeller blade and the paper cutout.
3. The paper cutout pushes against the surrounding air, which creates horizontal air resistance, or drag. This makes it harder for the cutout to spin. Because the cutout does not spin as easily, more energy from the rubber band is released into the propeller, which is much easier to turn. In this way, the paper acts like the rear rotor of a real helicopter
4. As the propeller spins rapidly, it begins to create lift by pushing air downward. With enough energy, the helicopter will fly in whatever direction it is pointing.Add TipAsk QuestionCommentDownload

Step 1: Materials

Materials

Please message me to report broken links. All of these materials are used in my other Instructables for kids, so your purchases can be used across multiple projects.

You can find an entire kit of materials here: Rubber Band Helicopter Kit

Or purchase tools and materials individually:

Plastic propellers(smaller pack)

Craft sticks
Paperclips
Rubber bands
Card stock
Masking tape
Scissors
Add TipAsk QuestionCommentDownload

Step 2: Propeller

Propeller
Propeller

The propellers from Kelvin.com should fit snugly onto a craft stickAdd TipAsk QuestionCommentDownload

Step 3: Paperclip

Paperclip
Paperclip
Paperclip

3 More Images

Bending and attaching the paperclip is usually the most challenging step for young kids in grades 1-3. I usually hold the end of the paperclip (on the right side of the photo) between my thumb and forefinger. Then I show how the paperclip bends inside itself. The students need to pull that inside bend apart from the rest of the clip.

Attaching the paperclip can also be tricky. It it’s not properly attached, it can be ripped off from too much tension. I try to make it simple for my students: hold the paperclip flat against the craft stick with the tip of the thumb, then tightly wrap a piece of masking tape around it.

It helps if the two ends of the paperclip are separated by the craft stick as shown in the photos, but it’s not necessary.Add TipAsk QuestionCommentDownload

Step 4: Paper Cutout

Paper Cutout
Paper Cutout
Paper Cutout

The paper cutout is crucial; it’s what make the copter work. If it’s too small, then it won’t create enough lateral drag, and too much of the energy in the rubberband will be diverted to the craft stick. If the cutout is huge, it’ll simply be too heavy.

I find that cutouts that are about 1.5″ by 7″ made from cardstock work really well. You can add flavor to this project by create templates for the students to trace, like a helicopter silhouette. For Halloween one year, I made a bat wing template and renamed the project ‘Baticopters’

Attach the cutout on the opposite side of the exposed paperclip – this will help ensure that the rubberband won’t rub against it.Add TipAsk QuestionCommentDownload

Step 5: Attach Rubberbands

Attach Rubberbands
Attach Rubberbands
Attach Rubberbands
Attach Rubberbands

There are a few ways to attach the rubberbands, but I think the easiest is to put your fingers inside the rubberband and stretch it. The taught rubberband should easily slip into the propeller hook and paperclip.

I find that two rubberbands is the ideal number, but you can experiment.Add TipAsk QuestionCommentDownload

Step 6: How to Fly

How to Fly

For some students, flying the helicopter is more challenging than building it. First of all, the helicopter must be wound up enough. The number of turns will be different depending upon what brand of rubberband you use. I twist the rubberband until it because completely coiled, and I keep going. You’ll notice that the rubberband begins to form a second set of twists that are bulkier – it looks like tight bundles of knotted rubberband. If you fill up the whole length of the rubberband with double-twisted rubberband, then it probably has enough energy.

To fly, hold the top of the propeller and the bottom of the craft stick near the paperclip. For a stable and high-reaching flight, you must let go of the top first and then the bottom within half of a second of each other. This can be difficult for young students to coordinate, so I tell hem to verbally say “tick tock.” As they say the words “tick tock,” they should respectively let go of the top and bottom of the helicopter.

Top 10 Luxury Helicopters in the World

Most people have heard of personal and charter jets, but luxury helicopters are the genuine gems. Not only are these aircraft comparatively less expensive, but helicopters can approach places that bulky jets can’t. Having a private or commercial helicopter is expedient, more environment friendly, and a symbol of status. Celebrities including Brad Pitt and Angelina Jolie and Donald Trump own a luxury helicopter, and this slot market has grown considerably in recent years due to demand from the rich.

They are well-appointed with all the newest technology, and interior seating marks that are designed in fine Italian leather upholstery.

Therefore the list of top 10 luxury helicopters is given below:

1. Augusta Westland AW119 Ke Koala:

luxury helicopters

The Koala is chiefly used by law enforcement, but it can easily provide accommodation to a group of corporate directors traveling on business. It has a VIP services quite adequately, with premium leather upholstery and seating for about 6 passengers and 2 operators. The Koala reaches a top speed of 166 mph (267 km/h) and a range of 618 miles (995 km). Price ranges from $1.8 to $3 million.

2. Eurocopter Hermès EC 135:

luxury helicopters

Though this brand of luxury helicopters is not suitable for long distant trips, is has a class apart built. The typical EC 135 will cost you a mere $4.2 million, but the one with the interior design from the best in class designer will cost you up to $6 million. The top speed is 178 mph, but the range is just 395 miles.

3. Augusta Westland AW109 Grand Versace VIP:

luxury helicopters

Augusta Westland teamed up with the Italian fashion house Versace to produce a super luxury interior for this fancier version of the AW109. The top speed is about 177 mph and a range of 599 miles. The mere difference is that all 599 of those miles will be more luxurious for the VIP passengers. Hence, will cost you $6.3 million price tag and the helicopter is fully covered in Versace leather, design and exterior.

4. Eurocopter Mercedes-Benz EC 145:

luxury helicopters

If you’re a Mercedes fan, now you can fly your preferred brand helicopter too. A regular EC 145 costs about $5.5 million, so the Mercedes version is going to cost anywhere around $7 million. But it’s totally worth it. No other Mercedes can go 153 mph while flying 17,000 feet above the ground. It has all the luxury of the famous German sports.

5. Eurocopter EC 175:

luxury helicopters

The EC 175 made its wonderful first appearance at the Paris Air Show in 2009. The chief feature of the EC 175 is that it can hold 16 passengers contentedly inside. The top speed reaches 178 mph (286 km/h), with a range of 345 miles (555 km). It costs whooping $7.9 million.

6. Eurocopter EC 155:

luxury helicopters

This is a luxurious chopper. Its top speed is an impressive 200 mph with a range of 533 miles. It can seat as many as 13 passengers; this spacious EC 155 aircraft will cost you $10 million.

7. Sikorsky S-76C:

luxury helicopters

The Sikorsky S-76C is more generally known as Black Hawk. The massive interior is large sufficient to fit up to a dozen passengers, but the seating occupies 4 passengers in Black Hawk model. It reaches a top speed of 178 mph (286 km/h) and has a range of 473 miles (761 km). It would cost you a $12.95 million.

8. Augusta Westland AW139:

luxury helicopters

The AW139 is appropriate for law enforcement, armed patrol and firefighters. It has a capacity to seat 8 passengers. The AW139 can reach an unbelievable top speed of 193 mph (310 km/h), with a range of 573 miles (922 km). It carries a beautiful interior costing you a hefty $14.5 million.

9. Bell 525 Relentless:

luxury helicopters

Like the Gulfstream 650 jet, the Bell 525 Relentless helicopter isn’t on the market currently. This chopper is going to cost $15 million. They predicted that the seating will be for 16, a top speed of 162 mph, and a range of 460 miles. This bright yellow Relentless with amazing seating will cost you a fortune.

10. Sikorsky S-92 VIP Configuration:

luxury helicopters

The S-92 can safely accommodate 9 passengers in its extensive interior cabin. The prices vary exponentially if you plan on decking the interiors with gold or crystal. The top speed of the S-92 is around 194 mph (312 km/h), with a range of 594 miles (956 km). The prices range from $17 million to $32 million.
Helicopter charter can be the most stress-free travel familiarity you will ever have. Which includes being able to travel outside of airports to reach vital meetings or even other flights in a different airport. Though rich class can afford these luxury helicopters, they are worth the investment.

Leave a Comment