You might also like to make the drones from scratch. One big advantage offered by this process is the fact that you have a wider choice as you are not restricted by the brand names for incorporating devices in your drone. Thus, you have the freedom to choose your preferred features.
But you must be wondering how expensive is it to build a drone at home? To be honest, it will be slightly cheaper if you buy a drone kit and build the whole setup yourself. If this sounds like something you would like doing, we suggest checking out our article about best frame kits for quadcopters.
But this also depends on the equipment you add to the kit. Here is an idea of what your total cost might be.
Usually, the drone frame kits range from $20 to $200 and sometimes even more. But on an average, a drone frame of $100 will get you a decent enough structure with the durability and good performance.
The price of the motors depends on the number of motors you use and their quality. For quadcopters, you would need four motors, two working in the clockwise direction and another two working in the anticlockwise direction. You would need 6 of these motors for hexacopters and 8 for octocopters.
The price varies according to the quality you want, but you should be somewhere around $10 to $100 for one motor. And, to be more familiar with this topic, you can also check out our article about drone motors.
Electronic speed controllers are required to bring your drone to work at your desired speed. The number of ESCs required will basically depend on the number of motors you possess. In the case of quadcopters, a set of 4 ESCs could charge you something around $30 to $50.
Propellers are another important component of the drone. It is necessary to get good quality props in order to have a stable flight and a good takeoff. For mini drones, this price may start at $2 and go up as high as $50.
Make sure that you choose the best propellers based on your drone’s characteristics.
Without a flight controller, your drone is pretty much held null and void.
You need to send instructions to your drone from the ground and that is why you need a flight controller. A good quality controller will charge you around $100 to $250, and to find out which models are the best, we suggest checking out our article about flight controllers.
It is always advisable to keep a few extra batteries in store apart from the regular ones. This will help you get more aerial action, even when one set of batteries is one charge. The price can vary anywhere between $5 and $20.
TRANSMITTER AND RECEIVER
For efficient connectivity of your drone to your flight controller, you would need a good transmitter and receiver. This could also be available in different price ranges.
You could choose one as low as $50 or opt for the more advanced one at $400.
This category would include a lot of wires and connectors necessary to finish up the setup. This shouldn’t charge much, but it is best to keep a budget of $50 just in case.
On the whole, making a drone from scratch could cost you something around $350-$500 for a regular drone and a little close to $1000 for a drone with advanced features.
Drones usually do not require much maintenance except for the occasional change of spare parts in case of aerial collisions.[the_ad_group id=”15″]
Propellers are some of the most fragile parts of the drone and could cost you a maximum of $10 for their replacement. Apart from these, there is not much maintenance required for drones.
As you can see, buying a drone is pretty much one big investment (the initial price) with added expenditures for improvement or repairs. According to what you’re looking for, the cost may be steep or affordable.