If you are in search of how to know a bad washing machine, then you have no worries. Not only are we going to provide you with that information, we are also going to be discussing how to know when your machine needs replacement, how to choose the right washing machine, and as well as washing machines problems and solutions.

There are lot of signals that washing machines shows, when they need a change, there are excessive leaking. If the motor coupler breaks, the washer can still fill with water and drain but the washer won’t agitate or spin, even though the drive motor runs. You might hear a loud buzzing sound when the motor is sounding.

It is important to choose a good washing machines and also beware of its necessary functions. It saves energy, resources, and unnecessary repair that might charge extra costs.


A great washing machine is more than just an appliance. It’s something you depend on to take care of your laundry so you can focus on what’s really important. But after several years of solid use, your washing machine will show its age much in the same way as anything else. Read on to see if it’s time for you to invest in a new machine.  

If repair estimates have you considering a new washing machine, you may also want to consider today’s cost for that shiny appliance. After all, prices have probably gone up since you bought your current washer. When weighing whether to toss or keep your old machine, you’ll want to do a side-by-side comparison, factoring in how long the old and new machines will last, as well as the costs to operate — like electricity, water and detergent– over their anticipated lifetimes.


While they usually have a higher price tag than standard models, some washing machines are designed to use less water and energy. Appliances that bear the seal, for example, use 10 to 50 percent less energy and water than conventional models. Energy Star is a collaborative program of the United States Environmental Protection Agency and the Department of Energy that endorses energy-efficient appliances.) Front-loading washing machines have become more popular household choices because they use less water and detergent than top-loading washers. Keep in mind that front-loading machines can cost two to three times as much as traditional consumer washers so take your loads per week into account. If you’re a frequent washer, the savings might add up quickly. Tax credits and rebates for purchasing energy-efficient appliances can offset the sales price, too.

The average life expectancy of a new washing machine is 11 years. Consumer Reports recommends replacing any appliance that’s more than eight years old, unless it’s a high-end model and has a particular appeal to you. Others suggest replacing any top-loading washer manufactured in 1999 or earlier. Even replacing a washing machine you purchased up to the year 2005 can reduce water consumption. If an appliance is still relatively new yet no longer covered under warranty and has broken down a lot, you may be better off getting rid of it.

If you’re concerned about the impact your decision has on the environment, you have even more to consider than monetary costs and convenience. Let’s say you’re of the opinion that it’s greener to fix an appliance at any cost than to junk it. You may not be able to find replacement parts for a washer that’s more than 10 years old. And remember that older appliances use more water and electricity than those manufactured after 2005. On the other hand, it may take years for the new washing machine to pay for itself in saved energy consumption. And one final note: old washers don’t usually end up in landfills these days. Their steel is recycled.

1. The drum won’t spin at the end of the cycle

When you take your clothes out of the washing machine they should be wet – but not soaking wet – thanks to the fast spin at the end of the cycle. But this fast spin can sometimes stop working, leaving you to open the washing machine door to find heavy clothes still drenched in water.

This could be because of:

  • Pressure system fault: The spin cycle kicks in when a pressure sensor shows the water has drained. A fault or blockage can stop this from working
  • Worn motor: This can make it difficult for the motor to reach the speed needed for the fastest spin. Worn carbon brushes are often to blame
2. The machine still works but the water hasn’t drained

Nothing is more frustrating than running a cycle only to find the water hasn’t drained, especially when your favourite shirt is inside.

If the drum is full of water and your machine still works it might be a problem with your pump filter, which is supposed to stop coins and pieces of material blocking your machine. Simple blockages, of the drain hose or U-bend beneath the sink, are easy to fix.

Can you hear the pump running? If it’s making a noise it isn’t a blockage and will need further investigation.

3. It’s more noisy than it should

It’s hard to relax as a family or concentrate on what you’re doing when a noisy washing machine is causing a disturbance in the kitchen.

The faster your drum is spinning, the louder and more unbalanced the machine will be. The noise is even greater when items get caught in the drum, or by washing ‘an unbalanced load’ – a bath towel with a couple of T-shirts, or any other combination of heavy and light fabrics. But it could also a sign there is a problem with the bearings.

How to check your bearings: Turn the washing machine drum by hand when it is empty and not being used. If it feels as though you’re pushing against something, you have a problem.

4. You don’t trust it with your clothes

There’s no point having a washing machine that you daren’t put your favourite jeans in.

The clothes you wear deserve proper care and attention. It makes no sense to put them in an appliance that’s past its best. One that fails to remove stains, rinse out all the detergent or, even worse, puts holes in them.



Choosing a washing machine can be challenging, especially since no household has the same laundry requirements. However,  before you buy a washing machine, there are a few factors you need to consider. We have divided the task of choosing the most popular mechanical device into five subsections. They are

  1. Capacity and Size
  2. Fully-Automatic/Semi-Automatic Washing Machine
  3. Front-Loading vs Top-Loading Washing Machines
  4. Wash Programs
  5. Other Factors to Consider

Capacity and Size

The most important thing about buying a washing machine is its load capacity which is measured in kg and is correlated with the number of members in a family.

However, the load capacity should be such that all the laundry comes in a single wash cycle and you do not have to run the wash cycle again and again.

Washing Machine Capacity Guide

Family MembersTank Capacity Number of Clothes 
1-2 Members5 to 6 Kg2 shirts
2 jeans
1 bedsheet
2 small towels
2 pillowcases
2-3 Members6.5 to 7 kg3 shirts
3 jeans
1 bedsheet
2 small towels
2 pillowcases
4-5 Members8 kg4 shirts
3 jeans
1 bedsheet
3 small towels
3 pillowcases
More than 5 Members8.5 kg to 9 kg3 shirts
3 jeans
2 bedsheet
6 small towels
6 pillowcases

Deciding Chart: How to Decide on the capacity

You need to consider the available space in your house and the size of your door too and carefully read the complete dimension of the particular washing before buying and make sure the washing machine comes inside your house comfortably.

Fully-Automatic vs Semi-Automatic Washing Machine

On the basis of operations it performs, there are two types of washing machines. One is fully automatic and another one is semi-automatic. In other words, the amount of manual intervention is the key to this classification. However, each one of them has its own benefits and drawbacks.


Semi-Automatic Washing Machines

It’s a traditional device and comes with two tubs or compartments, one for washing and another one for drying. Therefore, in this type of machine, a lot of manual intervention is required.

Firstly, you need to fill the tank manually with bucket or pipe, then add the detergent in the tub and set the washing time and type of fabric.

After completion of the washing cycle, the machine makes buzz sound which shows that the washing is complete. After that, you have to take out all the clothes from the washing tub and have to manually transfer them to the dryer section.

In a way, it gives more control over the washing process but it’s normally considered labor-intensive. The semi-automatic washing machines are always top

Worn bearings can place a heavy load on a motor and cause it to burn out prematurely. Any of the bearings in the washing machine’s transmission, the tub bearing or the sleeve bearings in the motor itself can cause early motor burnout.

topload washing machine should never be filled to the top. The general rule of thumb is that you should add clothes until the machine is about two-thirds full. That’s two-thirds of loosely packed clothes, so don’t try to pack as many clothes as you can in that area either.

This is a 2-speed drive motor for your washing machine. The motor rotates the spin basket when the washing machine is in spin or tumbling mode. You will likely need to replace the motor if you are experiencing burning smells or your washer will not start. 

Coupling is a component used to connect a drive shaft and a driven part, for example, a motor shaft and a ball screw for the purpose of transmitting the torque. Also, Coupling introduces mechanical flexibility providing misalignment for the shafts. 

Drain a Top-Loading Washing Machine

  1. STEP 1: Turn off the power.
  2. STEP 2: Locate the drain hose and water supply hoses.
  3. STEP 3: Drain the washing machine of water.
  4. STEP 4: Remove a drain hose clog.
  5. STEP 5: Remove a drain pump clog.
  6. STEP 1: Turn off the power.
  7. STEP 2: Locate the drain pump filter and/or drain tube.

Summary: Kenmore Elite is the up-scale lineup while the non-elite version is the basic lineup. Kenmore Elite costs more than the non-elite versions. Kenmore Elite have better features and improved aesthetics than the non-elite versions. 

The most common signs and symptoms of a bad AC capacitor include:

  • AC not blowing cold air.
  • AC takes a while to start once you turn it on.
  • Humming sound coming from your air conditioner.
  • AC shuts off on its own.
  • AC won’t turn on.

There are two types of capacitors — starter capacitors, which run for just a few seconds when a high-load motor starts, and run capacitors, which run continuously. Washing machines use starter capacitors to start the motor by increasing the torque for a few moments. 

To test the capacitor with a multimeter, set the meter to read in the high ohms range, somewhere above 10k and 1m ohms. Touch the meter leads to the corresponding leads on the capacitor, red to positive and black to negative. The meter should start at zero and then moving slowly toward infinity. 

bad motor capacitor may cause starting problems or could shut off the motor while running. Motor capacitors store electrical energy for the motor to use. A damaged or burnt out capacitor may hold only a fraction of the energy needed for the motor if its capacitance is low. 

capacitor can store electric energy when it is connected to its charging circuit. And when it is disconnected from its charging circuit, it can dissipate that stored energy, so it can be used like a temporary battery. In car audio systems, large capacitors store energy for the amplifier to use on demand.


he first step in buying a washing machine is a little advanced planning. Know your needs. For example, how much time do you spend doing laundry? Do you have a large family requiring daily clothes laundering, or are you a single person or a couple with no children? It’s also important to consider where your laundry room or washer and dryer will be located. If you are an apartment dweller, available space is probably an issue. If you have a multilevel home, space is probably still an issue, but more from a sense of location within your home and how far you have to go to change a load. Do you need to consider wheelchair accessibility or other health needs?

Thinking about when and how you do your laundry will help you compare washing machines and decide what size of washer or dryer to purchase and what cycle options are important to your family’s needs. If you are energy-conscious (or are trying to become so) there are several options and models available to meet this requirement. The main points to consider when buying a washer and dryer include cost, loading type, size, capacity, cycles, and energy efficiency.


So, how do you choose a good washing machine? Choosing your perfect washing machine can be a little tricky as they are available in different types like fully-automatic, semi-automatic, front load or top load They all come in different capacities and sizes. So it’s essential to choose the one that suits your family’s requirements.

If you are looking at buying the best washing machine, you will definitely come across its capacity, something like a 5kg washing machine, or a 6.5kg machine, or a 7kg washer. Whether it is a Fully Automatic or a Semi Automatic washing machine, a Top Loader or a Front Loader, they all come in different capacities or sizes. This makes one wonder the machine’s weight? No, it’s not the weight of the machine.

The next time your washing machine isn’t working, try checking all the simple things first before you call the repair man. Troubleshooting can save you a lot of time and money. If you still can’t resolve the issue after you have done these simple checks, then it might be time to call professional help.

Whether you have a front load washer or a top load washer, here are some common problems that can occur with your machine and easy solutions to fix them:

My Washer is Vibrating

There are a few possible reasons your washing machine could be vibrating:

  • Unbalanced load of laundry
  • The washer is not level
  • The washer feet may not be locked in and contacting the floor


  • Rearrange the load of laundry and be sure that you’re loading your washer correctly to avoid shifting. Check your manufacturer’s instruction book; inside, you’ll find a recommended maximum or optimum load weight. Use that as a guide. When you fill your washer make sure the clothes still have room to move freely and aren’t packed too tightly.
  • Check the floor to see if it’s level. You may need to add a ¾-inch piece of plywood under your washer.
  • Be sure the washer feet are in firm contact with the floor. Washing machines have adjustable, front leveling legs with a lock nut. You should adjust each leg to the proper height and then tighten the lock nut up against the body of the machine to keep the leg from rotating. After adjusting each leg, lean against the machine and make sure that you feel no movement. Some machines have the same type of legs in the rear that should be adjusted, but most machines have “self-adjusting” rear legs. These legs are set by tilting the entire machine forward onto its front legs with the rear legs about 3 inches off the floor and then setting the machine back down. The legs should adjust automatically.

My Washer is Leaking

If your washer is leaking water, it doesn’t automatically mean you need a major repair.  Leaking water could happen due to simple issues such as:

  • The washer is not balanced or loaded properly
  • Hoses are not attached/inserted properly
  • Hose washers are worn
  • Drains are clogged


  • Check to see that your machine is balanced, and make sure the washer basket is not out of alignment.
  • Check all your hoses and make sure they are tightened and properly connected. Check the hose washers for cracks or damage
  • Check water lines and faucets to ensure they are not leaking.
  • Make sure the washing machine is draining properly. If it’s not, check the drain hose as it could be clogged with lint, hair, or that missing sock.

My Washer is Making Strange Noises

Weird sounds such as clicking, gurgling or humming can be caused by objects that are caught in the washer, clogged drains, or internal sensors.


  • A clicking sound may mean that an object is caught in the washer drain. Be sure to check your drain and remove any objects that have been caught. Make sure to always check and remove items from pockets before washing.
  • If your washer is making an unusually loud gurgling noise, this may indicate that the washer drain line is partially clogged. Check the line and remove the blockage before a real problem can occur.
  • If you hear a humming or buzzing noise, that may indicate that something has jammed the pump. Check your pump and remove any objects that do not belong. If damage has been done you may need a new pump.

My Washer Will Not Run or Fill With Water

Before you think the worst, there are several simple items you should check first.

  • Don’t overlook the plug. The first thing you should always check is if the machine is plugged in. It may sound silly but dozens of times this problem has been solved by simply checking the plug.
  • If the power cord is plugged in, check to be sure the outlet has power and that your circuit breaker wasn’t tripped.
  • Check the water supply. Make sure the hoses are attached and both water inlet valves are open. Look for kinks in the hoses and make sure nothing blocking the inlet valve screens.
  • Check the inside lid switch. For most washers, the lid must be closed and the lid switch engaged to operate. Make sure there is no lint or dirt on the switch that is causing it to jam.

My Washer Won’t Drain or Spin Correctly

Drainage problems are most commonly caused by clogged hoses, improper loading of clothes, obstructions or too much detergent.


  • Sometimes items are overlooked even when you have checked pockets before loading your washer. Small items like coins, pens, or even a sock can get caught in the pump or between the basket and tub, blocking draining. Check the pump and between the basket for any unwanted items and remove them.
  • Overloading or improper loading will cause the machine to be unbalanced and prevent the washer from spinning correctly. Check your load and adjust by redistributing the wet laundry or removing some laundry to allow the washer to finish spinning.
  • Make sure the drain hose has been properly installed. The end of the drain hose should not be higher than 96 inches above the floor.
  • Remove and inspect the drain hose for clogs. Before reattaching, be sure to remove any residue from the hose.
  • Check to make sure you are using the proper amount of detergent.  Using too much detergent causes an overabundance of suds, which will slow the draining process and cause the washer to malfunction.

My Washing Machine Dispensers are Still Full of Detergent

The most common problems with an automatic dispenser malfunctioning is the use of the wrong formula or a lack of cleaning.


  • Check your washer manual to make sure you are using the right formula in designated dispensers. If your washer manual instructs you to use liquid bleach, don’t use powder bleach.
  • Make sure to clean your dispensers every month. Heat a cup of distilled white vinegar and pour it into the dispenser, then run the washer on a regular cycle. The vinegar will clean away any clogs or built-up residue.

Leave a Comment