how to make a rc flybarless helicopter

Here is a detailed post about How To Make A Rc Flybarless Helicopter. Suppose you are looking for how to make a rc helicopter step by step. Then reading this article may help. It also includes how to make a remote control helicopter from scratch.

Flying RC helicopter is really very exhilarating. Their versatility gives a RC pilot a complete access to the three-dimensional space in such a way that no other machines can! I have played RC helicopter for more than one year but still find that I have just learnt a few tricks that it can perform.

There are generally two micro-helicopters ( indoor ) in the RC market. I have already planned to buy one of them as they can fly inside the living room and even take off on ours hand. Unlike those operated by gas, these electric helicopters are very clean and give out no terrible noise at all. In one nightfall, I visited a web site, which is about how to make a hand made RC helicopter. I was totally impressed and started designing my own helicopter. Here is my helicopter:

how to make a rc helicopter step by step

How To Make A Rc Flybarless Helicopter

To make it you need these tools flat screw driver(chisel),tiny screw driver star(for making holes),scissors,hammer,ruler or tape rule. The first process it took is the fabrication process of making the heli frame by using a plain aluminium sheet.firstly i drew a suitable design for the frame before constructing it in a piece of paper,and use a compass to draw it on the aluminium sheet.
I chisel out some parts and make hole with the required tools
i do this when i am less busy and am trying to make it before i leave my school and i really love it i have make wired control car times without number and it was successful i even sold some.
schematic diagram
i needed some part to join the constructed frames together.i got these part from a lontor lamp and make some holes into it.Take closer look at the picture below
THE main plastic that hold the two frames together is orange stuff in picture above
The heli was coming up the next thing i did was to insert my main shaft which was gotten from a radio atenna into the gear.
NOTE:i did this process before screwing up together.
The gear hole was a little bit wider than the shaft so insert a bobo or viju milk straw and glue.i needed some part to make the frame stand firm,those part i drew in the book was constructed with the aluminium sheet and make the necessary holes into it before screwing it together to form the skeleton of the heli body.
I realize that am lacking something which was the motor holder and i fabricate that part with aluminium
The tail gear system will be shaft system because that what i get with my location,i will be using bigger and a little smaller atenna to the bigger one.The bigger one will be outside while small one will be the one to rotote from another soure i.e a mini motor.
The tail system will be using bivel gears with some plastic (blue) and a mini iron is very sophisticated it took me 90hrs to construct this part,then i glued the small bivel gear at the tip of the small shaft and glued the bigger bivel gear into the mini shaft before adding the blue plastic at the bigger shaft(you should understand what i meant bigger and smaller) so as to diffrentiate the sizes.
The swashplate the most important part for a controlled helicopter.I constructed my swashplate with two plastic and a straw this contain a bigger plate and a smaller plate with a plastic straw in betweem them so as to make the upper part rotate
making a helicopter is easy but getting the parts and the mechanical is not easy
I have built rc helicopter times without number think that it only require speed but unfortunately unsucessful but now i have understanding the basic principle of how rc helicopter works and decided to build a new one and share it people.
Like i said frame is the first thing i constructed i needed two pieces so make two of the same thing including the holer and i make a bearing from the aluminium sheet,folding 1cm with two holes at each side and make a hole in the middle which i put my viju straw into of 2cm and glue screwing them into the top of the helicopter for the shaft to be stable.
I melt a hole under the orange plastic for the shaft to penetrate and melt three holes at each side the same position on the frames so as to screw it together.
I fabricate some part to put the frame together like my motor holder which are battery sit part,tail boom holder,motor holder,shaft holder,tail motor sit which power the tail shaft and i screw them all together.i will make reply on how i make the landing gear….
Hello tommyclancy,

I would like to commend you on your work.

Although seemingly crude, I like your creativity in making use of readily-available, home-made materials to achieve / replicate what is a complex system.

Your work reminds me of Parkingzz here on NL, who did similar works on RC helis & airplanes.

Keep up the good work & don’t be discouraged by failures along the way.
I’m sure you’ll go places with your skills & gifts.

Most of the materials am using to build this helicopter was fabricated by me including the tail system,rotorhead,swashplate,landing gear etc also the blade, i wanted to build a fp helicopter but just because of the cyclic control i couldn’t,and the control linkage but i found it easy on flybarless helicopter.
Like i said earlier swasgplate is the most important mechanical part for the control of a rc helicopter.
I just want to give a little explanation on how swashplate works.swashplate is a device the allow the control of the heli tn be put into act and it is mechanically possible through the help of a servo,i wil explaining what does means and what it does later.swashplate as a two plate with a ball bearing in the middle,this how it works the upper plate moves along with the blade and with a mechanical linkage rod while the lower plate does not move but only recieve signal from the servo with aid of a linkage rod.
But in a flybarless helicopter the swashplate i built as no ball bearing because the work is to move up and down for the move of the blade to create a angle of attack when commanded to do so because it as no cyclic control.flybarless helicopter angle of attack is not fixed but collectively change when commanded and it does not vary with speed,fp helicopter varies with speed

how to make a remote control helicopter from scratch

Top 10 Luxury Helicopters in the World

Most people have heard of personal and charter jets, but luxury helicopters are the genuine gems. Not only are these aircraft comparatively less expensive, but helicopters can approach places that bulky jets can’t. Having a private or commercial helicopter is expedient, more environment friendly, and a symbol of status. Celebrities including Brad Pitt and Angelina Jolie and Donald Trump own a luxury helicopter, and this slot market has grown considerably in recent years due to demand from the rich.

They are well-appointed with all the newest technology, and interior seating marks that are designed in fine Italian leather upholstery.

Therefore the list of top 10 luxury helicopters is given below:

1. Augusta Westland AW119 Ke Koala:

luxury helicopters

The Koala is chiefly used by law enforcement, but it can easily provide accommodation to a group of corporate directors traveling on business. It has a VIP services quite adequately, with premium leather upholstery and seating for about 6 passengers and 2 operators. The Koala reaches a top speed of 166 mph (267 km/h) and a range of 618 miles (995 km). Price ranges from $1.8 to $3 million.

2. Eurocopter Hermès EC 135:

luxury helicopters

Though this brand of luxury helicopters is not suitable for long distant trips, is has a class apart built. The typical EC 135 will cost you a mere $4.2 million, but the one with the interior design from the best in class designer will cost you up to $6 million. The top speed is 178 mph, but the range is just 395 miles.

3. Augusta Westland AW109 Grand Versace VIP:

luxury helicopters

Augusta Westland teamed up with the Italian fashion house Versace to produce a super luxury interior for this fancier version of the AW109. The top speed is about 177 mph and a range of 599 miles. The mere difference is that all 599 of those miles will be more luxurious for the VIP passengers. Hence, will cost you $6.3 million price tag and the helicopter is fully covered in Versace leather, design and exterior.

4. Eurocopter Mercedes-Benz EC 145:

luxury helicopters

If you’re a Mercedes fan, now you can fly your preferred brand helicopter too. A regular EC 145 costs about $5.5 million, so the Mercedes version is going to cost anywhere around $7 million. But it’s totally worth it. No other Mercedes can go 153 mph while flying 17,000 feet above the ground. It has all the luxury of the famous German sports.

5. Eurocopter EC 175:

luxury helicopters

The EC 175 made its wonderful first appearance at the Paris Air Show in 2009. The chief feature of the EC 175 is that it can hold 16 passengers contentedly inside. The top speed reaches 178 mph (286 km/h), with a range of 345 miles (555 km). It costs whooping $7.9 million.

6. Eurocopter EC 155:

luxury helicopters

This is a luxurious chopper. Its top speed is an impressive 200 mph with a range of 533 miles. It can seat as many as 13 passengers; this spacious EC 155 aircraft will cost you $10 million.

7. Sikorsky S-76C:

luxury helicopters

The Sikorsky S-76C is more generally known as Black Hawk. The massive interior is large sufficient to fit up to a dozen passengers, but the seating occupies 4 passengers in Black Hawk model. It reaches a top speed of 178 mph (286 km/h) and has a range of 473 miles (761 km). It would cost you a $12.95 million.

8. Augusta Westland AW139:

luxury helicopters

The AW139 is appropriate for law enforcement, armed patrol and firefighters. It has a capacity to seat 8 passengers. The AW139 can reach an unbelievable top speed of 193 mph (310 km/h), with a range of 573 miles (922 km). It carries a beautiful interior costing you a hefty $14.5 million.

9. Bell 525 Relentless:

luxury helicopters

Like the Gulfstream 650 jet, the Bell 525 Relentless helicopter isn’t on the market currently. This chopper is going to cost $15 million. They predicted that the seating will be for 16, a top speed of 162 mph, and a range of 460 miles. This bright yellow Relentless with amazing seating will cost you a fortune.

10. Sikorsky S-92 VIP Configuration:

luxury helicopters

The S-92 can safely accommodate 9 passengers in its extensive interior cabin. The prices vary exponentially if you plan on decking the interiors with gold or crystal. The top speed of the S-92 is around 194 mph (312 km/h), with a range of 594 miles (956 km). The prices range from $17 million to $32 million.
Helicopter charter can be the most stress-free travel familiarity you will ever have. Which includes being able to travel outside of airports to reach vital meetings or even other flights in a different airport. Though rich class can afford these luxury helicopters, they are worth the investment.

Leave a Comment