how to make duvet in nigeria

As always, Koboguide showcases how to start curtain business in Nigeria, beddings in Nigeria and last but not least bedsheets images in Nigeria. It can be daunting searching the internet for the latest information but we’ve made life easier for you by compiling and showcasing a range of choices for you to choose from quickly and easily.

Additionally, you can also find on Koboguide how to make money in bedsheet business, bedsheet manufacturers in Nigeria and bed sheet dealers in aba. These are updated regularly so make sure to always check back regularly and share these with friends and family looking for this type of information.

Duvet covers are a great way to completely change the look of your room without investing in a new comforter or quilt as well as protecting your current comforter. This project is a fun way to redesign a place you spend a lot of time: your bed!

These fabric requirements do not take into consideration matching prints. To match a repeating design, you’ll need to determine how much extra fabric is needed based on the size of the repeated design. You will also need the same amount of fabric calculated for the top or you can use a flat sheet (for the same size bed as your comforter) for the bottom of the duvet cover. Note: Double-check your comforter measurements against those listed below as manufacturers’ sizes can vary. Featured Video

Small prints and even some stripes should not require matching. If you like, buy extra fabric to add complementing trim to curtains and pillows.

Measurements and Fabric Requirements
Bed SizeTwinFullQueenKing
Finished Duvet Measurements72 by 9084 by 9690 by 102102 by 108
Size of Top Before Hems and Seams73 by 9385 by 9991 by 105103 by 111
45″-wide Fabric Requirements5 1/4 yds5 1/2 yds8 3/4 yds9 1/4 yds
60″-wide Fabric Requirements5 1/4 yds5 1/2 yds5 7/8 yds6 1/4 yds
108″-wide Fabric Requirements    

What You’ll Need

Equipment / Tools

  • Measuring tape or ruler, marking tool, and scissors or rotary cutter, ruler, and mat
  • Pins
  • Sewing machine
  • Iron


Cut and Assemble Top and Bottom

If you have extra-wide fabric, such as 108″ wide quilt backing fabric for your duvet cover, cut 1 piece the length listed below for the size bed you have, then trim parallel to the selvages to match the cut width listed.

If using 45″ or 60″ wide fabric, all covers will require even side sections added to each side of your fabric. Refer to the chart for cutting your sections. Join side sections to the center section using 1/2-inch seams. ​Zigzag or serge your seams to prevent fraying. Press the seams.

Lay out the back and top section, right sides together. Pin enough to secure the two sections together. Stitch the side and bottom seams using 1/2-inch seams. Zigzag or serge the seam allowance.

Note: All directions are using 1/2-inch seams.

Bed SizeTwin SizeFull SizeQueen SizeKing Size
45″-wide fabric center section(1) 45″ by 93″ long(1) 45″ by 99″ long(1) 45″ by 105″ long(1) 45″ by 111″ long
45″-wide fabric side sections(2) 15″ by 93″ long(2) 21″ by 99″ long(2) 24″ by 105″ long(2) 30″ by 111″ long
60″”-wide fabric center section(1) 60″ by 93″ long(1) 60″ by 99″ long(1) 60″ by 105″ long(1) 60″ by 111″ long
60″”-wide fabric side sections(2) 7 1/2″ by 93″ long(2) 14″ by 99″ long(2) 16 1/2″ by 105″ long(2) 22 1/2″ by 111″ long
108″-wide fabric section

Measure, Mark, and Sew the Top Opening

Divide the finished width of the duvet cover by 3. Measure that distance in from both side seams along the top (open) edge of the duvet cover and mark to divide the top into thirds.

Measure 2 1/2″ down from the top edge along each side. From the side seams, mark a stitching line at the 2 1/2″ mark parallel to the top, stopping at each 1/3rd mark (the center will be left open to insert the comforter). Stitch a 2 1/2″ seam from the top edge to each 1/3rd mark, backstitching at each beginning and end

Press and Sew

Turn under 1/2″ on both raw edges of the 2 1/2″ seam allowance to the wrong side and turn under again. Press along the entire top edge on both sides of the seam allowance. Pin each 1/2″ hem and topstitch each one all the way across from side seam to side seam.

Finish Your Duvet Cover

In the center opening on the 2″ flange, place buttons and buttonholes evenly spaced approximately 5″ apart.

To keep the comforter in place inside the duvet cover, sew a small loop of fabric to each corner of the comforter. Sew a strip of fabric or ribbon to the side seams at the corners of the duvet cover. Apply snaps to the strip so they can be threaded through the loop on the comforter and held in place inside the duvet cover.

Leave a Comment