how to polish cowboy boots with stitching

If you are in search of how to polish cowboy boots with stitching, here is a perfect article on your search. Furthermore, it elucidates on how you polish cowboy boots with white stitch, how to remove shoe polish from stitching, and how to clean cow boy boots with household item.

You get a new pair of cowboy boots and just want to keep them shining forever. You had an old pair of cowboy boots and remember how they used to shine when you got them home.

Some people enjoy the glossy look of cowboy boots. For the others, however, they like distressed cowboy boots and never polish their boots once in their life.

HOW YOU CAN POLISH COWBOY BOOTS WITH WHITE STITCHES.

his is a crucial step to remain brand new cowboy boots, restore moisture on the leather, keep them from dirt water and extend your boots life.

It is also the best way to bring your old cowboy boots back to life again.

Besides, many cowboys/cowgirls love polishing their beloved boots and take very good care of them. This is such a good habit! Your boots would thank you for that, they deserve the shine anyway.

For cowboy boots with stitching, pay attention to clean the stitching of boots because it easily gets dirty there. Or you can take care of them after polishing your boot. See more below.

How to polish cowboy boots with stitching?

These steps apply to leather cowboy boots. Before starting to polish, you have to prepare some tools as well as the following tasks.

PREPARE

Here the polishing set:

  • Boot polish that is suitable for your own cowboy boots such as Kiwi Shoe Polish or Saphir…
  • A cloth (maybe an old sock, old jeans, old T-shirt in rags…)
  • Horsehair brush for cleaning and for shining boots
  • A buffing cloth or chamois
  • Bleach pen for white stitching or wax pencil for colored stitching

Make sure your cowboy boots are completely dry before polish.

Usually, people use boot dryers, boot trees,… to dry cowboy boots. You can find many useful tips to dry your cowboy boots quickly here!

You should clean the stitches of cowboy boots first and cover them with painter tape, then do the polish. This method can ensure the shoe polish does not stick to the stitches.

To deal with the stitches, you can clean them with a small horsehair brush and soap. Or depends on the colors of the stitches, you can use a white color pencil, bleach pen (recommended) for white stitches and wax pencil for colored stitches.

COWBOY

sTep 1. Apply polish on your boots

Wrap a cloth around two fingers (index and middle finger), take a dab of cream or wax polish.

If using cream, just take a small amount and then spread it out (don’t take too much or it’ll waste your cream).

Rub over your boots in a circular motion. The more careful you are, the more it soaks into your boot.

Note: Many people may see your boots clouding/fogging in this step. Don’t worry, you will get the luster results at the end of the process.

For some products, it will make your boot rich in color, not darken it, so don’t worry!

Step 2. Brush your boots

Use a horsehair shine brush to brush your cowboy boots quickly and repeatedly with short strokes around your boots. The bristle must be horsehair, no doubt.

Brush your boots until your hand gets tired. This helps the polish penetrate deeply and evenly into your cowboy boots. The more round you do, the shinier your boots are.

I usually coat 2 to 3 coats of polish on the surface of cowboy boots to ensure they retain the color for a long time.

Note: the brush for polishing your cowboy boots should be different from the cleaning brush.

Step 3. Wipe your boots

Using a clean cloth to wipe excess polish your boots. Rub until you see luster on your boots.

Step 4. Buff your boots

Buff the leather to add more shine! This step finishes your polishing process.

Use your buffing cloth in back-and-forth movements until you achieve a gloss as you wish.

HOW TO REMOVE SHOE POLISH STAINS

S­hoe polish is a quick and easy way to breathe new life into shoes that have seen better days. Unfortunately, while it can restore shoes to their former glory, it can destroy clothing and household surfaces. Follow these tips to remove the black marks against you.

Shoe polish is great for shoes but bad for almost everything else. These stain removal techniques will help put these unsightly marks behind you.

After you identify the affected material, follow the steps on these pages to get those shoe polish stains out:

  • Non washable fabrics such as Acetate, Burlap, Fiberglass, Rayon, Rope, Silk, Triacetate, Wool
  • Washable fabrics such as Acrylic Fabric, Cotton, Linen, Modacrylic
  • Household surfaces such as Acrylic Plastic, Aluminum, Asphalt, Ceramic Glass/Tile, Chromium, Enamel, Glass, Gold, Ivory, Jade, Paint (flat or gloss), Platinum, Plexiglas, Polyurethane, Silver, Stainless Steel, Vinyl Clothing, Vinyl Wallcovering
  • Alabaster and Marble
  • Carpet(synthetic or woo)
  • Cork
  • Grout
  • Wallpaper
  • Wood

ollow these steps to remove shoe polish stains from non-washable fabrics such as Acetate, Burlap, Fiberglass, Rayon, Rope, Silk, Triacetate and Wool:

  • Sponge (the method of using a dampened pad to apply light strokes, moving outward from the center of the stain) the area with a dry-cleaning solvent and apply a dry spotter.
  • Cover the stain with an absorbent pad moistened with dry spotter.
  • Let the pad remain in place as long as any stain is being removed.
  • Change the pad as it picks up the stain. Keep both the pad and stain moist with dry spotter.
  • Flush (the method of applying stain remover to loosen staining material and residue from stain removers) the stain with the dry-cleaning fluid.

If the stain persists:

  • Sponge it with water and apply a wet spotter and a few drops of ammonia. (Do not use ammonia on silk or wool.)
  • Cover the stain with an absorbent pad dampened with wet spotter and ammonia.
  • Change the pad as it picks up the stain, keeping both the stain and pad moist with wet spotter and ammonia.
  • Flush the area with water and repeat if necessary.
  • Allow to dry.
COWBOY BOOTS 1

Washable Fabrics

Follow these steps to remove shoe polish stains from washable fabrics such as Acrylic Fabric, Cotton, Linen and Modacrylic:

  • Sponge the area with a dry-cleaning solvent, spot lifter or cleaning fluid.
  • Allow it to dry.

Felt, Fur, Leather and Suede

Because of the dyes contained in shoe polish, this stain cannot be removed by a nonprofessional.

Grout

Follow these steps to remove shoe polish stains from Grout:

  • Wipe the stain with a cloth dipped in warm sudsy water.

If a stain remains:

  • Dip a wet toothbrush into a little baking soda or powdered cleanser.
  • Gently scrub the spot.
  • Rinse well and wipe dry with a soft cloth.

Nylon, Olefin, Polyester and Spandex

Follow these steps to remove shoe polish stains from Nylon, Olefin, Polyester and Spandex:

  • Immediately sponge the stain with suds made with dishwashing detergent.
  • Sprinkle lemon juice and salt over the area and allow to penetrate for 1 hour.
  • Rinse thoroughly with water and launder as soon as possible.
  • Repeat treatment if necessary.

Wallpaper

Follow these steps to remove shoe polish stains from Wallpaper

Note: This stain might permanently dye the paper.

  • Rub the area very gently with a damp cloth sprinkled with a little baking soda.
  • Wipe the area with a cloth dampened with cool clear water.
  • Do not let the wet area spread or run.
  • Overlap strokes to prevent streaking.
  • Use a clean cloth to gently pat dry.

hOW TO CLEAN COWBOY BOOTS WITH HOUSEHOLD ITEM

Well, 

You all are aware of the conditioning effect of the hair conditioner.

It not only smoothens your hair but also gives a healthy shine to it.

The micro fibers of leather are quite similar in texture and behaviour to our hair strands.

Thus,

The hair conditioner works on your leather boots in a similar way.

To begin with, just follow the following steps

ITEMNEEDED
HAIR CONDITIONER1
WATER
TOOTH BRUSH1
WET PIECE OF CLOTH1
MIXING BOWL1

STEP 1: In a mixing bowl mix the hair conditioner with water in a liquid consistency.

STEP 2: Take the tooth brush and rub the mixture of hair conditioner and water in a slow, gentle and circular motion on the leather boots. Keep it for 5 minutes.

STEP 3: Now take the wet piece of cloth and take off the hair conditioner from the leather fibers. Do not over wet the boots with water.

STEP 4: Dry the leather boot under sun or using a hair dryer.

RESULT:

Because of its incredible wax properties, the hair conditioner provides a great assistance in giving the leather boots an effective cleanliness and conditioning.

2. TALCUM POWDER Works Wonders to Remove Grease from Boots

I guess grease is a headache to all?

Be it in the kitchen or on your boots grease just refuse to get off!

ITEMNEEDED
TALCUM POWDER1
SOFT BRISTLED TOOTHBRUSH1

STEP 1: Take a generous amount of talcum powder and puff it onto your leather boots. Allow it to set on the boot for 1 hour. The talcum would have absorbed all the grease from the boots.

STEP 2: Now take a soft bristled tooth brush and rub off the excess talcum powder along with the grease and stains from it.

COWBOY 2 1

RESULT:

The talcum powder removes all grease from your boots and leaves them fresh and clean. The good news is, there is no chance of the boot to get wet in this process.

ITEMSNEEDED
BAKING SODA2 TABLE SPOONS
WATER
MIXING BOWL1
SPOON1
WET PIECE OF CLOTH1
SPRINKLE BOTTLE1

STEP 1: In a mixing bowl add 2 table spoons of baking soda and add water to make a thin paste by mixing with the spoon.

STEP 2: Transfer the mixture to the spray bottle and spray on the oil stains in your leather boots. Allow it to stay overnight or at least for 3-4 hours and let it dry.

STEP 3: Take the piece of wet cloth and rub the baking soda off the boot. Make sure you do the rubbing part very gently.

Leave a Comment