Worried about How To Soften Leather Belt? This is a detailed research on how to soften hardened leather. It contains how to soften old leather straps. If your preference is how to restore leather belt, then this article is perfect for you.
Leather belts are a status symbol, emanating a unique air of power and style that rubber and cloth belts can’t match. It’s an essential item—every grown man and woman should have at least two to three leather belts in their wardrobe.
The only problem with leather belts is that it sometimes feels tough and uncomfortable, mostly when the belts are:
Brand-New: New leather belts are elegant, stylish accessories that can significantly improve any outfit with ease. It is not always comfortable to wear because you’ll have to ‘break them in’ for a few days or weeks before the leather softens and adapts.
Old: Leather tends to stiffen when it isn’t maintained. Not only is a tough belt uncomfortable to wear, but it also causes creases, cracks, and lines on the surface that can ruin the belt for good.
Is there a quick and easy way to soften your leather belt? Of course, there is.
Here are three items you can use to loosen the stiff, tense fibers of your leather belts effortlessly:
how to restore leather belt
How To Soften Leather Belt
1. Leather Conditioner
The simplest way to soften your tough leather belt is by applying a leather conditioner. Squeeze a generous amount onto your fingers and spread it onto the surface of the belt.
The challenge here isn’t applying the conditioner, but rather, choosing a good brand. Here are some considerations:
- Most leather conditioner products are pricey, but it is worth every penny. If you’re going to use cheap brands, you will end up needing to buy better quality alternatives anyway.
- Go for chemical-free options. Chemicals can harm the fibers of your leather belt.
- Choose leather conditioners used on bridles and saddles—these products not only soften your belt but also fortify and strengthen it.
2. Alcohol-Vaseline Mixture
Another easy leather-softening method uses common household items. It’s simple and only takes a few minutes, so it is still a solid alternative to leather conditioners.
What You’ll Need:
- rubbing alcohol
- petroleum jelly
- cotton balls
- Drench the cotton swabs in rubbing alcohol and then wipe on the belt’s surface. Rub a generous amount of it to open the pores and remove impurities. Try to apply around five to ten coats.
- Dip your finger in petroleum jelly and spread the mixture on the belt. Note that you don’t need too much jelly to soften the tense belt fibers. Too much will leave a sticky, gooey mess.
- Let the belt dry before use.
3. Natural Oil Treatment
If you are looking for a natural alternative, try natural oils like:
- coconut oil
- jojoba oil
- avocado oil
- almond oil
- olive oil
Note: You can essentially use anything with which you would moisturize your own face.
- Leave the leather belt in the sun for around ten minutes to open its pores and loosen the fibers.
- Once ready, apply the natural oils on the surface of your belt using your fingers. Unlike with conditioners or petroleum jelly, using too much won’t harm the leather, so you don’t have to be stingy with the application.
- Let the oils dry.
That’s it—three easy ways to soften a leather belt that won’t break the bank. Badichi Belts are also 100% genuine leather and age beautifully, so you’ll never have to worry about poor quality materials interfering with your style evolution.
how to soften hardened leather
How To Cut Leather Insoles For Sandals Using Simple Tools
I love sandals, especially with the leather insoles and with the toe strap in front and I am sure you too. Do you?
If yes, you will love this post, if not, tune out right now, don’t read it, it’s not for you.
In today’s shoe making tutorial I will teach you how to how to cut leather insoles for sandals with basic shoemaking tools. This will be super useful for your shoemaking craft because..
You will be able to implement this shoemaking trick right away in making your sandals.
This trick is about making the accurate cut inside of the leather insoles for the toe loop without any special shoemaking tools.
Usually to make this cut, an opening for the toe loops in sandals with leather insoles, you need to have a special shoemaking cutter.
Because I know how it is difficult to find appropriate shoemaking tools, in all my courses I teach how to make shoes professionally without special shoemaking tools.
So this super useful shoemaking trick I took from my “Unisex sandal course” where I teach a full process of making sandals.
Right now you can learn this trick in the video below and apply it today in your shoemaking work.
Obviously, after this shoe making tutorial you will have many questions
about leather that I used,
how to find right placement on the insoles for the cut
and maybe you will have many other different questions, so don’t hold back and ask me in the comments below the post.
If your questions will be relevant, I will answer for sure!
So here are my answers for your possible questions:
1. For the leather insoles I use shoulders with thickness of 2.5-3mm.
Sometimes if I can’t find good vegetable leather, the shoulders part, I use soles bends.
It’s thicker leather and harder, but you can skive the edge, for example, and mold it on the shoe last to create desirable shape that repeat the last’s bottom shape!
2. To find the placement to make a cut you should :
-Attach your leather insoles to the last’s bottom with masking tape. Don’t use nails, you don’t holes on your beautiful leather insoles, right?
– The sandals lasts usually have split in toe area to make a toe loop. So just mark with the awl the line from the beginning of this split and continue it a little bit more.