Light holder price

Finding the best Light holder price options can be hard if you’re unaware of what features to look for especially that there are so many of them to find around. For this reason, we’ve put up a guide highlighting the top light holdersin the category.

Our team has researched and reviewed these products to help you come up with a better decision.

Top rated Light holder price products

Leviton 10083-M Electrolier 1-Circuit Lamp Holder, 250 W, Incandescent, Medium, Phenolic Body, Aluminum Shell, Contra...

By Levitonproduct price$4.13 4.7 | 120 customer ratings
93% of the ratings are 4-stars or 5-stars

Install one of these in a lamp with 3-way sw. We thought at first it was defective as the lightwould go out at different times. Used a second one (same delivery) and same thing. To shorten the story, found the LED bulb to be defective (1st one I’ve had problems with, (the bulb). Replaced it, and have had no issues since. Have a couple more lamps to convert from 3-way to single throw switches.        

Replaced faulty switch in lamp that was purchased on Amazon 2 years ago. Switch was simple to replace and much more economical than buying new lamp.By Sam O Var

Worked well as a replacement switch. “On” position is a little narrow…meaning that…as you turn the dial you must be careful not to pass the “on” position so that you must rotate all the way around again. Other than that little issue, great switch.       

Leviton 55 001-000-000 1-Circuit Keyless Weatherproof Lamp Holder with 6 in Pigtail Leads, 660 W, Incandescent, Mediu...

By Levitonproduct price$3.76 4.6 | 68 customer ratings
91% of the ratings are 4-stars or 5-stars

These are great little basic lampholders. I install plugs onto the wire ends to make little drop lights that I can hang from an extension cord to light up an area I’m working on. They are awesome for that. The rubberized coating on the socket allows them to be thrown into a tool box and beaten up without breaking, unlike the brittle phelonic plastic whatever that other sockets are made out of. Leviton has been manufacturing these things for decades. There is a reason why they are still making them.        

I damaged a socket on a set of patio string lights trying to get a broken bulb out and this fixed it perfectly. Cut the Broken socket off, wired/taped this one in, works perfectly, can’t even tell it’s been repaired.        

Solid little pigtail fixtures. Use them for temporary lighting on jobs where additional lighting is needed or when installing drywall ceilings between install and paintBy FJC JR

AspenTek Fireproof Material E27 to 2 E27 Lamp Holder Converter Socket Led Light Bulb Base Type E26 to 2 E26 Splitter ...

By AspenTekproduct price$6.99 4.7 | 36 customer ratings
90% of the ratings are 4-stars or 5-stars

There is nothing printed on the extensions; therefore, these are likely NOT UL approved. Also, the manufacturer does not pack these well (just in a plastic bag) and one came crushed. Overall length of the adapter is 2 7/16″ long which gives an approximate 1 1/2″ extension of the bulb. UPDATE – Seller sent replacement for damaged piece. EXCELLENT seller support/. I raised my stars from three to five based on their support.        

Worked to make some floodlights fit old outdoor fixtures. They don’t seem super durable, but as long as you are CAREFUL don’t break them while installing, you should be good to go.By D. Wade

This did exactly what I needed. New LED bulbs are a bit shorter than the older CFL or incandescent bulbs, so they fit too far into recessed lighting fixtures. These adapters lengthen the bulbs enough so they work well. Installing them is as simple as screwing in a light bulb.        

Ajax Scientific Mes Type Bulb Holder (Pack of 12)

By Ajax Scientificproduct price$9.76 4.5 | 79 customer ratings
85% of the ratings are 4-stars or 5-stars

Building something to light up the science fair? These bulb holders are sturdy, and provide a nice flat base for mini bulbs needing to stay put on a flat surface. Bulbs screw in smoothly, and wires can be attached without trouble.        

These little bulb holders are perfect. They are not super sturdy, but they are solid enough for what they need to be. They have a plastic base – the mounting holes are big enough for a #4 but if you use a #6 it will a little tight. The screw-posts for the electrical contacts are very good quality and you can tighten them down on your wire without fear of the assembly cracking.        

These are a good match to the inexpensive Ajax Scientific light bulbs Amazon offers. Provides reasonable-quality screw-down wire connections. Has two small holes you can use to fasten to a surface using a screw or bolt. I didn’t test the whole bag but used five, all of which functioned correctly.        

10-Pack LH0619 UL Listed Non-Shunted BJB 26.313.1016.50 Slide On U-Lamp Holder Medium Bi-Pin Socket for Fluorescent T...

By BJBproduct price$15.00 4.8 | 16 customer ratings
100% of the ratings are 4-stars or 5-stars

These low profile, non-shunted lamp holders are perfect for retrofitting 4 foot overhead fluorescent ceiling fixtures with new LED bulbs. I retrofitted about 40 four-bulb fluorescent ceiling light fixtures in a retail business, and I used these low profile lamp holders in certain fixtures where the full size non-shunted tombstone lamp holders would not fit. In those cases, these low profile lamp holders were the perfect solution. I recommend you use 18 AWG solid copper wire, and you simply strip the wire end and insert into the back of the lamp holder socket. Remember that non-shunted connectors like these are REQUIRED when you retrofit an existing fluorescent fixture with direct drive LED bulbs. The direct drive LED bulbs are those that take 120 VAC on one end of the bulb and the other end is inactive and just requires a lamp holder to hold the        

I am the general manager of a hardware store. We sell LED T-8’s and of course direct replacement as well as those the require 120VAC. Problem is no non-shunted tombstones we had would fit my trough lights. This works great if your lights require low profile sockets. These are the only ones I could find on Amazon or elsewhere that work.       

We recently replaced a lot of ballast and some of our tombstones were bad. I purchase these to replace the bad ones and they seem to work really well for us.By G. J. Schraudt

Kulka 00582 - #582 GDF Fixed End Lamp Holder for T12/HO Lamps (KULKA 582GDF FIXED END)

By Kulka4 offers from product price$3.99 4.5 | 27 customer ratings
85% of the ratings are 4-stars or 5-stars

Easy to install & gave an old restaurant sign a new bright life.By Amazon Customer

Was exactly what I needed. The sign is lit up again. Thank you for reasonable cost.By DNA

This is exactly like the old one, but the new starters only have one wire for holder and no one will tell me how to wire it.By Amazon Customer

Leviton 2536 104-0-000 Pedestal Lamp Holder with Plunger, 660 W, Fluorescent, Slim line, Thermoplastic, White

By Levitonproduct price$5.40 4.7 | 17 customer ratings
100% of the ratings are 4-stars or 5-stars

Perfect replacement for the discontinued 2534 plungers Easy install, and works perfectly.By Mat

Exactly as described. Perfect replacement.By Brian Hilory

Perfect for LED 48″ lights. BUT Packaging not up to snuff. No tape on box/shipping carton when received and 2 of the 3 ordered were long gone. At least run one ribbon of tape around the folded book carton. Not real happy about paying $15 and only receiving $5 worth of product.       

LIGHT YOUR WORLD Pack of 15 - UL Listed Non-Shunted T8 Lamp Holder Socket Tombstone with 12 inches Wires Attached for...

By LIGHT YOUR WORLDproduct price$16.90 4.9 | 12 customer ratings
100% of the ratings are 4-stars or 5-stars

These tombstones can either slide in or snap in. They have little spring-loaded ears on the sides as well as grooves for slide-in installation. Looks to be universal fit. I have tried to show this in pictures. I bought the wrong kind first and I got to pay the return shipping. These easily snapped into my enclosure and I got instant gratification.        

Like the quality and having them ready wired to save time. The height of these reflect newer applications so if you are dealing with T12 fixtures you may need to replace both ends.By WWJ

Worked perfect for my old shop light to convert to single end power LED T8’sBy Steven

Leviton 8101 019-0-000 1-Circuit 2-Piece Keyless Lamp Holder with Tew Wire Leads, 660 W, Incandescent, Medium, White

By Levitonproduct price$4.36 4.2 | 63 customer ratings
77% of the ratings are 4-stars or 5-stars

This is a ceramic socket instead of plastic. The nice thing about ceramic is that it can take more heat but this was not needed for my project. The portion around the threaded socket unscrews allowing you to make a hole in your project slightly larger than the actual socket, then install socket with gasket, finally rescrewing the socket lock into place to secure the socket in place. PROS: – Socket can take heat from typical old-style incandescent bulb – The trim piece around the socket removes and serves as the lock when reinstalled – Includes gasket to install just above locking ring to serve as slight insulation and help keep snug – The wire leads were about 6 inches long allowing for easy connections SUGGESTIONS: – Be careful not to drop the locking nut made of ceramic or I’m sure it will surely break if it hits a hard surface        

This was an exact replacement for an old, old ceiling fixture bulb socket.By Jeff E.

Was surprised and pleased to find these at a reasonable price. Have several fixtures bot at antique stores that need new sockets. They are exactly the same as the originals

Leviton 001-09880 PORCELAIN LAMPHOLDER, White

By Levitonproduct price$8.11 4.3 | 32 customer ratings
82% of the ratings are 4-stars or 5-stars

Used these to rebuild some outdoor lamps. Works great! They are made of ceramic material, thus won’t burn or support a fire, but they are brittle, if you drop one, during installation, they will usually shatter.        

If you happen to need these, this is a great way to get them in multiples … usually the hardware store will only have a coupleBy NadaBrahmaBaby

the ceramic is very brittle and prone to flaking off. You have to handle them with care. I had some chips come of the first one. Lesson learned, the second one went on fine. I do have some ceramic bulb holders from several decades ago, which don’t seem to have this problem, but the whole genX and millenials have been born since then.        

Leviton 9874 Porcelain Outlet Box Mount, Incandescent Ceiling Lampholder, Keyless, White

By Levitonproduct price$8.26 4.2 | 43 customer ratings
80% of the ratings are 4-stars or 5-stars

love these classic porcelains . its hard to find ones that dont have chains or plugs in them or are plastic. these look great with edison bulbs in them .. the bad news is that you should know that they wont cove the usual electrical box. sho for a retrofit they wont cover the hole . if youre building fromscratch theres a box that works fine with them        

These porcelain lampholders are very sturdy. Don’t bother with flimsy plastic lampholders, spend the extra cash on porcelain and save yourself time in the long run. I’ve seen plastic lampholders crack and break in as little as one to two years….junk! I won’t install anything besides porcelain lampholders in customer’s houses.        

Just like the old ones but smaller in diameter. The old one had an additional set of holes beyond the pair in this one. This version has one pair of holes that do match the box, but the diameter of the unit is almost exactly the same as the circular box, and thus does not completely cover the opening unless it is situated precisely in the center of the box. Not a problem for the garage though       

Leviton 80054 Miniature Bi-Pin Base, G4, G6.35, GY6.35, GX5.3 MR16, GZ4 MR11, Halogen, Incandescent, Ceramic Body Lam...

By Levitonproduct price$6.61 4.1 | 73 customer ratings
77% of the ratings are 4-stars or 5-stars

I had purchased a Solar light for my driveway a few years ago. I went to a local home improvement store to purchase replacement solar batteries. But found out they did not stock the batteries for my light. I looked for a replacement light fixture to replace the existing solar light. But decided I liked the look of the one I had., So I decided to convert my solar light to a low voltage LED light. This socket was exactly what I was looking for. It has worked out very well.        

These are perfect for the G4 base Philips LED modules I bought. (I’ve posted a picture here.) Other bases I’ve tried that claimed to fit different base types had holes that were too far apart and/or not tight enough to grip the bulbs firmly. Not so with these Levitons. I do have to say that I can’t picture them working on an MR16 base bulb – the holes were tight enough with the G4s and the pins are a lot thinner than the MR16s. *Update* Also found to be fine for MR11 base bulbs.        

Ordered this to replace another socket where the lead had become dislodged from inside the ceramic socket. Got it wired up and fired up in about 10 minutes… lasted about a week. This one is now dislodged as well and no longer functional. Sigh…        

Leviton 9063 Medium Base, One-Piece, Keyless, Incandescent, Phenolic Lampholder, Pony Cleat, Single Circuit, Open Ter...

By Levitonproduct price$5.75 4.7 | 10 customer ratings
100% of the ratings are 4-stars or 5-stars

I wanted to install 4 garage LED ceiling lights but wasn’t too excited to fish wire for new boxes. I just surfaced mounted extension cords to these lampholders but used liquid tape to cover the wire connection screws. OK, probably not code but I’m not worried about causing a fire or getting anyone electrocuted. I wouldn’t do this for 60W+ incandescent bulbs because of the bulb heat. I screwed in deformable LED radar motion detection lights. Perfect solution! I could have run conduit for surface mounting but this is much cheaper, easier and less noticeable if your wire is the same color of the ceiling.        

Well, its a lightbulb holder-base-socket-thing. Im no electrition but I wanted to add a light inside a decorative piece I built. And it worked. Using this cord (http://www.amazon.com/gp/product/B00HP8SUUM/ref=cm_cr_ryp_prd_ttl_sol_3) it hooked up with the turn of a screw (I covered the keys with electrical tape so as to cover live wire) and secured it to the project through the holes in the base with wood screws. Added a flourescent bulb and done. easy, cheap, works – winner.        

Careful tightening screws…they’re BRITTLE. Trust me.By L. D. Smith IISee all customer reviews

Legrand-Pass & Seymour 808CC10 Easy Installation Product Heavy Duty Impact Resistant Edison Plug Base

By Pass & Seymourproduct price$7.56 5.0 | 7 customer ratings
100% of the ratings are 4-stars or 5-stars

Works great, I needed one in this specific orientation because I’m in a rental property and couldn’t remove the sconce covering the light. I use it for a single strand of lights which I’ve strung across my patio for better ambience when I have guests over. Perfect solution and I don’t have to worry about cords coming through doorways or windows.       

Well built, much better than anyone I came across so farBy brian

Works great. Hard to screw up with something like this, but I suppose it’s possible. But not in this case.By S.A. Scully MolderSee all customer reviews

Leviton B01-29816-00C Fluorescent, 1-Pack, White

By Levitonproduct price$3.43 4.1 | 68 customer ratings
78% of the ratings are 4-stars or 5-stars

Great value and works well, but I wish I had paid more attention to the fact that the pull is a string instead of a chain. I won’t take stars off since it was my lack of noticing, though. Perfect for my closet.By Jeffrey D. Crane

I bought this to use in an older home renovation project because it has the retro look I was going for . It is an exact match for the light fixtures that I was replacing . The house was built a half century ago and I wanted to keep the look accurate to the time . The fixtures are solidly made and the glazing is top notch . The pull chain comes with a white extension string that can easily be cut to fit whatever height is needed . Installation is a breeze and the look is prefect .        

Good replacement for the light in the closetBy Usman RahimSee all customer reviews

BJB Electric LP LH0619 26.313.1016 Unshunted, T8 Only Straight Inserti

By BJB Electric LP1 offer from product price$6.99 4.7 | 8 customer ratings
100% of the ratings are 4-stars or 5-stars

works perfect for my light fixtureBy James Wenzel

Work as it should beBy Amazon Customer

Great price and quick shipping.By Amazon CustomerSee all customer reviews

Sigma Electric, Bronze 14782BR Round Cover and Two Lamp Holder Kit

By Sigma Electricproduct price$12.22 4.7 | 7 customer ratings
100% of the ratings are 4-stars or 5-stars

Its works as it should color is nice and very simple you install and easy to adjustBy Arias Lee

PriceBy Sharon Dvorak

Attachment screws could be longerBy DonBSee all customer reviews

LH0428 BA15s single contact bayonet low voltage lampholder

By Import1 offer from product price$6.85 5.0 | 5 customer ratings
100% of the ratings are 4-stars or 5-stars

Worked as a replacement in my low voltage guide lights. Worked as designed, good fit and quality.By DT Arizona

Just what I needed and shipped fast. Actually has two wires, black and white. You can ignore or cut off the white wire if you screw the case to a grounded metal surface.By Mark

Fast shipping Good productBy Ray SeddonSee all customer reviews

10 Pack - UL Listed LH0842 BJB 26.620.2006.50 Tall UNSHUNTED T5 Miniature Bipin Rotary Locking LAMP Holder

By BJBproduct price$13.49 4.7 | 6 customer ratings
100% of the ratings are 4-stars or 5-stars

My husband said they were perfect replacements for his lights.By Amazon Customer

As advertised works greatBy Nick

Great fit good priceBy Peter CoonsSee all customer reviews

HH Fluorescent LH0450 125-7 Starter Base Lamp Holder With Two Hole Bra

By HH Fluorescent1 offer from product price$6.99 4.6 | 5 customer ratings
100% of the ratings are 4-stars or 5-stars

Item worked perfect for my application.Would buy again.By R. Racus

The starter base is as advertised and works well. I used it in a bug light.By Amazon Customer

I bought two of these so that I could change the starters on my but zapper without soldering cutting or crimping and they worked out great. The materials used seem to be ok not made in the USA quality but for the job that needs to be done okay.        

Leave a Comment